3D Fox - 3D Printer / CNC Cont
8.4 14
v1.4.20 di EliSoft 3D
Su 3D Fox
Print G-code files directly from your Android device via Wifi, Bluetooth or USB OTG/Host port.
3D Fox is simple to use, has a clear and meaningful log screen and works great on small/inexpensive devices as well.
Developed with a Reprap Prusa i3 with Mega2560+Ramps+Marlin+Slic3r, Wifi module ESP8266 and BT module JY-MCU, it should work with many other HW/SW combinations.
SPECIAL FEATURES:
• Web interface to upload and print files from your PC/Tablet browser over the network.
• Take back control of SD card printing jobs after losing connection with the printer. You can use this feature to manager several printers with the same device: start a print job on printer A, then do something else on printer B, finally go back to printer A and take back control of the pending printing job.
NOTES:
• You must put your G-code files in \3DFox directory of your Andorid device. Use a file manager (we recommend ES File Explorer) to move files from their original location to \3DFox
• 3D Fox does not work with MakerBot or other printers using a proprietary communication protocol.
USB CONNECTION
• Android device must have a USB OTG/Host port: http://en.wikipedia.org/wiki/USB_On-The-Go
• Supported printer USB-to-serial chips:
- CDC ACM (eg Arduino Mega)
- FTDI (eg Melzi)
- CH34x
- CP210X, PL2303
WIFI MODULE ESP-01 (ESP8266 chip) succesfully tested:
• Firmware: transparent bridge \'esp-link\' by JeeLabs: http://github.com/jeelabs/esp-link
• Baud rate: 250000.
• Upload speed: 1 MB transferred in 100 s (with Mega2560+Marlin), comparable to USB connection speed.
• Antenna: performances boosted with this improvement: http://www.thingiverse.com/thing:1665680
BLUETOOTH MODULE
• Bluetooth module JY-MCU connection and configuration: http://reprap.org/mediawiki/index.php?title=Jy-mcu#A_simple_way_to_change_BT_module_settings_-_apparently_using_ftdi_chip.2C_but_not_recommended
FREE VERSION LIMITATIONS:
• Max file size for printing and uploading: 2 MB
SUPPORT:
• For questions or bug reporting do not hesitate to write to Elisoft3D@gmail.com.
• For bug reporting please do not use Google Play Review comments as they do not allow an effective interaction with our development team.
3D Fox is simple to use, has a clear and meaningful log screen and works great on small/inexpensive devices as well.
Developed with a Reprap Prusa i3 with Mega2560+Ramps+Marlin+Slic3r, Wifi module ESP8266 and BT module JY-MCU, it should work with many other HW/SW combinations.
SPECIAL FEATURES:
• Web interface to upload and print files from your PC/Tablet browser over the network.
• Take back control of SD card printing jobs after losing connection with the printer. You can use this feature to manager several printers with the same device: start a print job on printer A, then do something else on printer B, finally go back to printer A and take back control of the pending printing job.
NOTES:
• You must put your G-code files in \3DFox directory of your Andorid device. Use a file manager (we recommend ES File Explorer) to move files from their original location to \3DFox
• 3D Fox does not work with MakerBot or other printers using a proprietary communication protocol.
USB CONNECTION
• Android device must have a USB OTG/Host port: http://en.wikipedia.org/wiki/USB_On-The-Go
• Supported printer USB-to-serial chips:
- CDC ACM (eg Arduino Mega)
- FTDI (eg Melzi)
- CH34x
- CP210X, PL2303
WIFI MODULE ESP-01 (ESP8266 chip) succesfully tested:
• Firmware: transparent bridge \'esp-link\' by JeeLabs: http://github.com/jeelabs/esp-link
• Baud rate: 250000.
• Upload speed: 1 MB transferred in 100 s (with Mega2560+Marlin), comparable to USB connection speed.
• Antenna: performances boosted with this improvement: http://www.thingiverse.com/thing:1665680
BLUETOOTH MODULE
• Bluetooth module JY-MCU connection and configuration: http://reprap.org/mediawiki/index.php?title=Jy-mcu#A_simple_way_to_change_BT_module_settings_-_apparently_using_ftdi_chip.2C_but_not_recommended
FREE VERSION LIMITATIONS:
• Max file size for printing and uploading: 2 MB
SUPPORT:
• For questions or bug reporting do not hesitate to write to Elisoft3D@gmail.com.
• For bug reporting please do not use Google Play Review comments as they do not allow an effective interaction with our development team.
Aggiornamento 3D Fox 1.4.20
v 1.4.20• Upgraded to Android 16
v 1.4.19
• Added support for Idex printers and for SKR2 and SKR3 boards
v 1.4.18
• USB communication: now working with SKR boards
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• 2 decimal digits for XYZ positions and moves (Pro)
Leggi di Più
Caratteristiche 3D Fox
Versioni Precedenti
Altro
Variant
Arch
Version
DPI
40
March 15, 2026
3D Fox - 3D Printer / CNC Cont
1.4.20
(40)
Requires Android: Android 4.0.3+
Screen DPI: 160-640dpi
SHA1: f6e953731e20e399bd6eca88e7c30fc398813a5c
Size: 1.48 MB
What's New:
v 1.4.20
• Upgraded to Android 16
v 1.4.19
• Added support for Idex printers and for SKR2 and SKR3 boards
v 1.4.18
• USB communication: now working with SKR boards
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• 2 decimal digits for XYZ positions and moves (Pro)
• Upgraded to Android 16
v 1.4.19
• Added support for Idex printers and for SKR2 and SKR3 boards
v 1.4.18
• USB communication: now working with SKR boards
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• 2 decimal digits for XYZ positions and moves (Pro)
Android 4.0.3+
160-640dpi
39
March 13, 2026
3D Fox - 3D Printer / CNC Cont
1.4.20
(39)
Requires Android: Android 4.0.3+
Screen DPI: 160-640dpi
SHA1: bb9540d79b1db7ce94015802da9cdeab6c3fd91e
Size: 1.48 MB
What's New:
v 1.4.20
• Upgraded to Android 16
v 1.4.19
• Added support for Idex printers and for SKR2 and SKR3 boards
v 1.4.18
• USB communication: now working with SKR boards
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• 2 decimal digits for XYZ positions and moves (Pro)
• Upgraded to Android 16
v 1.4.19
• Added support for Idex printers and for SKR2 and SKR3 boards
v 1.4.18
• USB communication: now working with SKR boards
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• 2 decimal digits for XYZ positions and moves (Pro)
Android 4.0.3+
160-640dpi
Requires Android: Android 4.0.3+
Screen DPI: 160-640dpi
SHA1: 95b0f1f00efa3726786d663cf0959674c70542e3
Size: 1.78 MB
What's New:
v 1.4.19
• Added support for Idex printers and for SKR2 and SKR3 boards
v 1.4.18
• USB communication: now working with SKR boards
v 1.4.16
• Improved support for Android 10
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• 2 decimal digits for XYZ positions and moves (Pro)
• Added support for Idex printers and for SKR2 and SKR3 boards
v 1.4.18
• USB communication: now working with SKR boards
v 1.4.16
• Improved support for Android 10
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• 2 decimal digits for XYZ positions and moves (Pro)
Requires Android: Android 4.0.3+
Screen DPI: 160-640dpi
SHA1: 5bb82e8e58a7eb2337ab1811672e1387b678a7ac
Size: 1.78 MB
What's New:
v 1.4.18
• USB communication: now working with SKR boards
v 1.4.16
• Improved support for Android 10
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• More Custom Commands
• 2 decimal digits for XYZ positions and moves (Pro)
• No file size limitation for Web interface upload (Pro)
• USB communication: now working with SKR boards
v 1.4.16
• Improved support for Android 10
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• More Custom Commands
• 2 decimal digits for XYZ positions and moves (Pro)
• No file size limitation for Web interface upload (Pro)
Requires Android: Android 4.0.3+
Screen DPI: 160-640dpi
SHA1: 8d2cb67300ff1a1c59ee687e7780dc11cde79fa4
Size: 1.26 MB
What's New:
v 1.4.17
• USB communication: now working with Marlin 2.0 and 32 bit boards
v 1.4.16
• Improved support for Android 10
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• 2 decimal digits for XYZ positions and moves (Pro)
• No file size limitation for Web interface upload (Pro)
• USB communication: now working with Marlin 2.0 and 32 bit boards
v 1.4.16
• Improved support for Android 10
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• 2 decimal digits for XYZ positions and moves (Pro)
• No file size limitation for Web interface upload (Pro)
Maggiori Informazioni
Nome Pacchetto:
Data Aggiornamento:
2026-03-15
Ultima Versione:
1.4.20
Aggiornamento Necessario:
Disponibile su:
Requisiti:
Android 4.0.3+
Rapporto:
Sicuro da Scaricare
APKFab.com e il link per il download di questa app sono sicuri al 100%. Tutti i link per il download delle app elencate su APKFab.com provengono da Google Play Store o sono inviati dagli utenti. Per le app da Google Play Store, APKFab.com non le modificherà in alcun modo. Per le app inviate dagli utenti, APKFab.com verificherà la sicurezza della firma APK prima di rilasciarle sul nostro sito web.