USB External Camera/Webcam
3.9 313
v1.10 di Stoked Studios
Su SnapExWebcam
USB external webcam application that displays the camera output and takes pictures (or a picture every second in interval mode). Simply attach an OTG (on-the-go) USB adapter to a common webcam* and connect to your smartphone or tablet for an external camera system! Uses include a car rear-view backup camera, building/pipe inspection, an extreme sport camera, or a wearable camera to record all your adventures!
Notes:
KNOWN SUPPORTED WEBCAMS:
Logitech Webcam C250
Microsoft LifeCam VX-5000
Uxcell Mini
...
most commercial webcams are likely to work
*ROOT-SUPERUSER, V4L KERNEL, USB HOST SUPPORT REQUIRED SEE BELOW*
*GALAXY NEXUS AND NEXUS 7 KNOWN SUPPORTED*
*V4L (Video 4 Linux) support is provided by the Android OS (kernel). Every Android device has an OS and may or may not support V4L. If your stock kernel does not support V4L, a V4L enabled kernel can be installed if the device is rooted (see disclaimer and kernel details below).
*Devices must support USB HOST to power the webcam. Most newer devices are enabled.
KERNEL DETAILS:
!!Warning, only qualified users should attempt these steps as it can get complicated.!!
Required tools: See: http://source.android.com/source/initializing.html
FOR GALAXY NEXUS KERNEL:
1. Get the correct kernel:
$ git clone https://android.googlesource.com/kernel/omap.git
2. Add the following to tuna_defconfig (path: ~/omap/arch/arm/configs)
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_MEDIA=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
2. Comment out the following to the video Kconfig (path: drivers/media/video/Kconfig):
#source "drivers/media/video/omapgfx/Kconfig"
3. Add permission in ueventd.tuna.rc:
666 to /dev/video0
666 to /dev/video1
Check the developer website for Galaxy Nexus V4L enabled kernel updates.
DISCLAIMER
*The developer publishes this app in good faith, but users assume all risk.Developer has no liability and provides no guarantees. This application requires superuser access and a V4L supported kernel. Modifications to manufacturer systems can void a warranty. Not all webcams may be supported. Most major brands are supported. The webcam may need to be plugged in a few seconds before opening the app to initialize.
Notes:
KNOWN SUPPORTED WEBCAMS:
Logitech Webcam C250
Microsoft LifeCam VX-5000
Uxcell Mini
...
most commercial webcams are likely to work
*ROOT-SUPERUSER, V4L KERNEL, USB HOST SUPPORT REQUIRED SEE BELOW*
*GALAXY NEXUS AND NEXUS 7 KNOWN SUPPORTED*
*V4L (Video 4 Linux) support is provided by the Android OS (kernel). Every Android device has an OS and may or may not support V4L. If your stock kernel does not support V4L, a V4L enabled kernel can be installed if the device is rooted (see disclaimer and kernel details below).
*Devices must support USB HOST to power the webcam. Most newer devices are enabled.
KERNEL DETAILS:
!!Warning, only qualified users should attempt these steps as it can get complicated.!!
Required tools: See: http://source.android.com/source/initializing.html
FOR GALAXY NEXUS KERNEL:
1. Get the correct kernel:
$ git clone https://android.googlesource.com/kernel/omap.git
2. Add the following to tuna_defconfig (path: ~/omap/arch/arm/configs)
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_MEDIA=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
2. Comment out the following to the video Kconfig (path: drivers/media/video/Kconfig):
#source "drivers/media/video/omapgfx/Kconfig"
3. Add permission in ueventd.tuna.rc:
666 to /dev/video0
666 to /dev/video1
Check the developer website for Galaxy Nexus V4L enabled kernel updates.
DISCLAIMER
*The developer publishes this app in good faith, but users assume all risk.Developer has no liability and provides no guarantees. This application requires superuser access and a V4L supported kernel. Modifications to manufacturer systems can void a warranty. Not all webcams may be supported. Most major brands are supported. The webcam may need to be plugged in a few seconds before opening the app to initialize.
Aggiornamento SnapExWebcam 1.10
1. Moved button to the top to avoid accidental clicks2. Changed code to ensure ads load only when button is clicked
Leggi di Più
Caratteristiche SnapExWebcam
Versioni Precedenti
Altro
Requires Android: Android 2.3.2+
Architecture: armeabi, armeabi-v7a
Screen DPI: 120-480dpi
SHA1: 4f3d959fa8108e072527f5425927d9179a66597c
Size: 1.64 MB
What's New:
1. Moved button to the top to avoid accidental clicks
2. Changed code to ensure ads load only when button is clicked
2. Changed code to ensure ads load only when button is clicked
Requires Android: Android 2.3.2+
Architecture: armeabi, armeabi-v7a
Screen DPI: 120-480dpi
SHA1: ed6f14da64c2202cb5c038b643e9bf63b99cb255
Size: 1.64 MB
What's New:
SDK update
Requires Android: Android 2.3.2+
Architecture: armeabi, armeabi-v7a
Screen DPI: 120-480dpi
SHA1: f814d0d92760e69c7ae478cdaf79f316c85d1e50
Size: 1.64 MB
What's New:
SDK update
Requires Android: Android 2.2+
Architecture: armeabi, armeabi-v7a
Screen DPI: 120-480dpi
SHA1: 57253692eab8ee963c41e7c367937cb4b855e1e5
Size: 140.91 KB
Maggiori Informazioni
Nome Pacchetto:
Categoria:
Data Aggiornamento:
2018-07-01
Ultima Versione:
1.10
Aggiornamento Necessario:
Requisiti:
Android 2.3.2+
Rapporto:
Sicuro da Scaricare
APKFab.com e il link per il download di questa app sono sicuri al 100%. Tutti i link per il download delle app elencate su APKFab.com provengono da Google Play Store o sono inviati dagli utenti. Per le app da Google Play Store, APKFab.com non le modificherà in alcun modo. Per le app inviate dagli utenti, APKFab.com verificherà la sicurezza della firma APK prima di rilasciarle sul nostro sito web.