Car Gauge Lite OBD2
6.1 52
v3.61.14 by OBD Scantech
關於 Car Gauge Lite
Car Gauge Lite（包名：Scantech.CarGaugeLite）開發者是OBD Scantech，Car Gauge Lite的最新版本3.61.14更新時間為2015年03月04日。Car Gauge Lite OBD2的分類是通訊。您可以查看Car Gauge Lite OBD2的開發者下的所有應用並找到Car Gauge Lite OBD2在安卓上的55個相似應用。目前這個應用免費。該應用可以從APKFab或Google Play下載到Android 2.0+。APKFab.com的所有APK/XAPK文檔都是原始文檔並且100%安全下載的資源。
Important Notice:
Car Diagnostic Pro is available Car Diagnostic Pro
You can create custom Dasboards and the application will communicate with the vehicles ECU at the 16 Pin OBD II diagnostic connecter. Most of the OBD II connector location should be under the Steering Wheel Compartment. ELM 327 Bluetooth Adapter is required to make this application work. Car Gauge Lite not only can be exciting with Dashboards, it is a Professional Scan Tool. Do you have a check engine light on? Do you want to know the Readiness Status will pass for a Smog Inspection? Do you want to check the functionality of the Sensors and determine the status of the Mode 5/6 Emission On-board Test(Some Models may not support it)? Car Gauge Lite will show you.
Please Note:
Some of the Bluetooth Devices are not compatible with the app. App does not support the Mini Elm 327 v2.1!
Please test your device with Elm 327 Checker ELM 327 Checker
Vehicle computer system have multiple signal protocols and ELM 327 supports many of them. Currently, the following protocols are supported by the app and MUST be an OBD II Compliant Vehicle.
[Protocols Supported]
* VPW - 1996-2004 Year (GM vehicles)
* PWM - 1996-2004 Year (Ford vehicles)
* ISO 9141(Slow) - 1996-2004 (Chrysler, European, and Asian vehicles)
* KWP 2000(Slow/Fast) - 1996-2004 (Chrysler, European, and Asian vehicles)
* CAN (11/29 Bit) - (2004 and Newer)
[Car Gauge Lite Supports the Following with Limited Views]
[OBD II Generic]
* Mode 1 - Analog/Digital Gauges (160/215 Generic PIDS)
* Mode 1 - List View (220 Generic PIDS)
* Mode 2 - Freeze Frame Data
* Mode 3 - Read Current Faults
* Mode 4 - Clear Faults
* Mode 5 - O2 Sensor Test Result (Non CAN Bus)
* Mode 6 - On-board Test Result
* Mode 7 - Read Pending Faults
* Mode 8 - Evaporative System Leak Test
* Mode 9 - Vin, Performance Tracking Data, ECU Name, Calibration and Verification ID
* Mode A - Read Stored Faults
* I/M Readiness Status
* O2 Sensor Location
HARDWARE REQUIREMENT: ELM 327 (Clone Type) Bluetooth Adapter or OBDLink MX
Vendors Type: CHX, OBDII, BAFX Bluetooth Device tested OK.
Car Diagnostic Pro is available Car Diagnostic Pro
You can create custom Dasboards and the application will communicate with the vehicles ECU at the 16 Pin OBD II diagnostic connecter. Most of the OBD II connector location should be under the Steering Wheel Compartment. ELM 327 Bluetooth Adapter is required to make this application work. Car Gauge Lite not only can be exciting with Dashboards, it is a Professional Scan Tool. Do you have a check engine light on? Do you want to know the Readiness Status will pass for a Smog Inspection? Do you want to check the functionality of the Sensors and determine the status of the Mode 5/6 Emission On-board Test(Some Models may not support it)? Car Gauge Lite will show you.
Please Note:
Some of the Bluetooth Devices are not compatible with the app. App does not support the Mini Elm 327 v2.1!
Please test your device with Elm 327 Checker ELM 327 Checker
Vehicle computer system have multiple signal protocols and ELM 327 supports many of them. Currently, the following protocols are supported by the app and MUST be an OBD II Compliant Vehicle.
[Protocols Supported]
* VPW - 1996-2004 Year (GM vehicles)
* PWM - 1996-2004 Year (Ford vehicles)
* ISO 9141(Slow) - 1996-2004 (Chrysler, European, and Asian vehicles)
* KWP 2000(Slow/Fast) - 1996-2004 (Chrysler, European, and Asian vehicles)
* CAN (11/29 Bit) - (2004 and Newer)
[Car Gauge Lite Supports the Following with Limited Views]
[OBD II Generic]
* Mode 1 - Analog/Digital Gauges (160/215 Generic PIDS)
* Mode 1 - List View (220 Generic PIDS)
* Mode 2 - Freeze Frame Data
* Mode 3 - Read Current Faults
* Mode 4 - Clear Faults
* Mode 5 - O2 Sensor Test Result (Non CAN Bus)
* Mode 6 - On-board Test Result
* Mode 7 - Read Pending Faults
* Mode 8 - Evaporative System Leak Test
* Mode 9 - Vin, Performance Tracking Data, ECU Name, Calibration and Verification ID
* Mode A - Read Stored Faults
* I/M Readiness Status
* O2 Sensor Location
HARDWARE REQUIREMENT: ELM 327 (Clone Type) Bluetooth Adapter or OBDLink MX
Vendors Type: CHX, OBDII, BAFX Bluetooth Device tested OK.
Car Gauge Lite 3.61.14 更新
Up to date with the latest features. View limitations applies in lite version.
查看更多
Car Gauge Lite 資訊
歷史版本 更多
Car Gauge Lite OBD2
3.61.14
APK
2015年08月12日
4.22 MB
Requires Android: Android 2.0+
Screen DPI: 160-480dpi
SHA1: 19daf2e5dfe79ca1bf9a3cc313f99d55b8ce07e7
Size: 4.22 MB
What's New:
Up to date with the latest features. View limitations applies in lite version.
更多資訊
更新日期:
2015-03-04
最新版本:
3.61.14
請求更新:
系統要求:
Android 2.0+
舉報:
Car Gauge Lite相似應用
更多
OBD Auto Doctor scanner
OBD Auto Doctor 是 ELM 327 的領先 OBD2 汽車診斷工具
8.4 1K+
GaragePro Car OBD2 Scanner
從所有 ECU 讀取 OBD 代碼 + 使用任何 ELM327 掃描儀訪問特殊功能
6.5 515
bimmer-tool Lite
讀取BMW發動機運行的故障代碼和參數
9.1 65
