OctoApp: OctoPrint & Klipper
9.6 808
v3.0.28 by Livingroom Workbench
About OctoApp
OctoApp (Package Name: de.crysxd.octoapp) is developed by Livingroom Workbench and the latest version of OctoApp: OctoPrint & Klipper 3.0.28 was updated on November 11, 2025. OctoApp: OctoPrint & Klipper is in the category of Tools. You can check all apps from the developer of OctoApp: OctoPrint & Klipper and find 200 alternative apps to OctoApp: OctoPrint & Klipper on Android. Currently this app is for free. This app can be downloaded on Android 8.1+ on APKFab or Google Play. All APK/XAPK files on APKFab.com are original and 100% safe with fast download.
OctoApp is build with Android in mind and is completely optimized for being used on your phone. Of course OctoApp also supports Wear OS!
The app supports OctoPrint, Klipper (Moonraker, Fluidd, Mainsail), Bambu Lab and Elegoo Centauri.
The UI is structured into three workspaces: Connect, Prepare, Print. The Connect workspace helps you get your printer connected to OctoPrint and as soon as a printer is available OctoApp will move to the Prepare workspace. Here you can get ready for your next print! Heat your hotend, swap filament or level the bed. When you are ready and start your print, OctoApp shows the Print workspace where you can control and tune your print!
This concepts allows for a simple and fast UI while not sacrificing on features!
OctoApp already offers you:
🖨 Easy print preparation
🕹 Control your print
🗄 Full file access and management
📟 Full terminal access
🎛 Flow rate, Feed rate and fan controls
📷 Webcam support (also muticam support)
🌛 Dark mode
🏎️ High performance
🔉 Notifications about your print and filament
🔍 Gcode Viewer
🖨 Support for multiple printers
🔌 Many power control plugins like PSU Control or IKEA Tradfri
💡 Automatic lights
🔮 PrintTimeGenius support
💜 Support for many of your favourite plugins, like ArcWelder or SpoolManager
🌎 Remote connection with supported plugin or manual setup, the app switches automatically
🚀 OctoEverywhere integration
🕵️♂️ Obico integration
🔐 Works with VPNs, HTTPS and Basic Auth
⌚️ WearOS app with many features
🖖 And much, much more!
There is a new feature update roughly 4-8 weeks! Let me know what you are missing!
Important notice for remote connections: The app does not provide required servers. You can either set something up yourself and provide the app with a URL reachable over the internet or use a plugin like OctoEverywhere, Obico or ngrok.
---
OctoApp is made for and compatible with but not officially associated with OctoPrint. OctoApp is not officially associated with Mainsail, Fluidd, Moonraker or Klipper.
OctoPrint is a registered trademark. Learn more at octoprint.org
The app supports OctoPrint, Klipper (Moonraker, Fluidd, Mainsail), Bambu Lab and Elegoo Centauri.
The UI is structured into three workspaces: Connect, Prepare, Print. The Connect workspace helps you get your printer connected to OctoPrint and as soon as a printer is available OctoApp will move to the Prepare workspace. Here you can get ready for your next print! Heat your hotend, swap filament or level the bed. When you are ready and start your print, OctoApp shows the Print workspace where you can control and tune your print!
This concepts allows for a simple and fast UI while not sacrificing on features!
OctoApp already offers you:
🖨 Easy print preparation
🕹 Control your print
🗄 Full file access and management
📟 Full terminal access
🎛 Flow rate, Feed rate and fan controls
📷 Webcam support (also muticam support)
🌛 Dark mode
🏎️ High performance
🔉 Notifications about your print and filament
🔍 Gcode Viewer
🖨 Support for multiple printers
🔌 Many power control plugins like PSU Control or IKEA Tradfri
💡 Automatic lights
🔮 PrintTimeGenius support
💜 Support for many of your favourite plugins, like ArcWelder or SpoolManager
🌎 Remote connection with supported plugin or manual setup, the app switches automatically
🚀 OctoEverywhere integration
🕵️♂️ Obico integration
🔐 Works with VPNs, HTTPS and Basic Auth
⌚️ WearOS app with many features
🖖 And much, much more!
There is a new feature update roughly 4-8 weeks! Let me know what you are missing!
Important notice for remote connections: The app does not provide required servers. You can either set something up yourself and provide the app with a URL reachable over the internet or use a plugin like OctoEverywhere, Obico or ngrok.
---
OctoApp is made for and compatible with but not officially associated with OctoPrint. OctoApp is not officially associated with Mainsail, Fluidd, Moonraker or Klipper.
OctoPrint is a registered trademark. Learn more at octoprint.org
OctoApp 3.0.28 Update
Last major update:🐼 Bambu Lab support
🐴 Elegoo Centauri support
🎥 Configure webcams in the app
Last bugfix update:- Fixed issue with last layer of Gcode parsing
- Fixed Moonraker API key login
- Fixed 16KB memory alignement
- Enforcing plugin version 3.0.2 for Elegoo Centauri
Read More
OctoApp Features
Previous Versions
More
Variant
Arch
Version
DPI
300056
November 10, 2025
OctoApp: OctoPrint & Klipper
3.0.28
(300056)
Requires Android: Android 8.1+
Architecture: arm64-v8a
Screen DPI: nodpi
SHA1: abe718f90d6fc3c7dcf523eae6092ab7feec0e7f
Base APK: de.crysxd.octoapp.apk
Split APKs: config.arm64_v8a, config.en, config.xxhdpi
Size: 26.98 MB
What's New:
Last major update:
🐼 Bambu Lab support
🐴 Elegoo Centauri support
🎥 Configure webcams in the app
Last bugfix update:- Fixed issue with last layer of Gcode parsing
- Fixed Moonraker API key login
- Fixed 16KB memory alignement
- Enforcing plugin version 3.0.2 for Elegoo Centauri
🐼 Bambu Lab support
🐴 Elegoo Centauri support
🎥 Configure webcams in the app
Last bugfix update:- Fixed issue with last layer of Gcode parsing
- Fixed Moonraker API key login
- Fixed 16KB memory alignement
- Enforcing plugin version 3.0.2 for Elegoo Centauri
arm64-v8a
Android 8.1+
nodpi
300056
November 11, 2025
OctoApp: OctoPrint & Klipper
3.0.28
(300056)
Requires Android: Android 8.1+
Architecture: armeabi-v7a
Screen DPI: nodpi
SHA1: f9c652efb890faaca29936bb2071abad8ce4683d
Base APK: de.crysxd.octoapp.apk
Split APKs: config.ar, config.armeabi_v7a, config.de, config.en, config.es, config.fr, config.hi, config.in, config.it, config.ja, config.ko, config.mdpi, config.my, config.pt, config.ru, config.th, config.tr, config.vi, config.zh
Size: 64.85 MB
What's New:
Last major update:
🐼 Bambu Lab support
🐴 Elegoo Centauri support
🎥 Configure webcams in the app
Last bugfix update:- Fixed issue with last layer of Gcode parsing
- Fixed Moonraker API key login
- Fixed 16KB memory alignement
- Enforcing plugin version 3.0.2 for Elegoo Centauri
🐼 Bambu Lab support
🐴 Elegoo Centauri support
🎥 Configure webcams in the app
Last bugfix update:- Fixed issue with last layer of Gcode parsing
- Fixed Moonraker API key login
- Fixed 16KB memory alignement
- Enforcing plugin version 3.0.2 for Elegoo Centauri
armeabi-v7a
Android 8.1+
nodpi
Requires Android: Android 8.1+
Architecture: armeabi-v7a
Screen DPI: nodpi
SHA1: b4daac9f34232e2a5a2e6b15fbd076baff192912
Size: 64.9 MB
What's New:
Last major update:
🐼 Bambu Lab support
🐴 Elegoo Centauri support
🎥 Configure webcams in the app
Last bugfix update:- Fixed Elegoo webcam sometimes not connecting
🐼 Bambu Lab support
🐴 Elegoo Centauri support
🎥 Configure webcams in the app
Last bugfix update:- Fixed Elegoo webcam sometimes not connecting
Requires Android: Android 8.1+
Architecture: armeabi-v7a
Screen DPI: nodpi
SHA1: b7ed1372cabbac9efa1436178817b16e7103d415
Size: 64.83 MB
What's New:
Last major update:
🐼 Bambu Lab support
🐴 Elegoo Centauri support
🎥 Configure webcams in the app
Last bugfix update:- Fixed Bambu Lab connection error message
🐼 Bambu Lab support
🐴 Elegoo Centauri support
🎥 Configure webcams in the app
Last bugfix update:- Fixed Bambu Lab connection error message
Requires Android: Android 8.1+
Architecture: armeabi-v7a
Screen DPI: nodpi
SHA1: ff269a3e4d089b1407c5923d5c0c6d25223a3869
Size: 64.83 MB
What's New:
Last major update:
🐼 Bambu Lab support
🐴 Elegoo Centauri support
🎥 Configure webcams in the app
Last bugfix update:- Allow bgcode upload
- Tweak local connection/remote connection selection for Bambu Lab
- Fix webcam widget not displaying webcam after removing a secondary webcam
🐼 Bambu Lab support
🐴 Elegoo Centauri support
🎥 Configure webcams in the app
Last bugfix update:- Allow bgcode upload
- Tweak local connection/remote connection selection for Bambu Lab
- Fix webcam widget not displaying webcam after removing a secondary webcam
More Information
Package Name:
Update Date:
2025-11-11
Latest Version:
3.0.28
Need Update:
Available on:
Requirements:
Android 8.1+
Report:
Safe to Download
APKFab.com and the download link of this app are 100% safe. All download links of apps listed on APKFab.com are from Google Play Store or submitted by users. For the app from Google Play Store, APKFab.com won't modify it in any way. For the app submitted by users, APKFab.com will verify its APK signature safety before release it on our website.