MP 3D Printer WiFi Connect
6.2 7
v1.0 by Matthew Upp
MP 3D Printer WiFi Connectの詳細
Matthew Uppからリリースされた『MP 3D Printer WiFi Connect』はツールアプリだ。apkfab.com/jpから『MP 3D Printer WiFi Connect』のファイルサイズ(APKサイズ)：1.09 MB、関連ムービー、pv、スクリーンショット、詳細情報などを確認できる。apkfab.com/jpではMatthew Uppより配信したアプリを簡単に検索して見つけることができる。現在、MP 3D Printer WiFi Connect appのダウンロードも基本プレイも無料だ。『MP 3D Printer WiFi Connect』のAndroid要件はAndroid 4.1+なので、ご注意ください。APKFabあるいはGooglePlayから『MP 3D Printer WiFi Connect apk』の最新バージョンを高速、安全にダウンロードできる。APKFab.com/jpでは全てのAPK/XAPKファイルがオリジナルなものなので、高速、安全にダウンロードできる。
MP 3D Printer WiFI Connect will make connecting your Monoprice Select Mini 3D Printer to WiFi a quick and painless process.
Follow the steps below to get your Select Mini connected to your existing 2.4 GHz wireless network.
1. Disconnect USB cable from the printer
2. Turn on the MP Select Mini.
3. Open the MP 3D Printer WiFi Connect App.
4. Verify the correct SSID is displayed.
5. Enter wireless network password.
6. Use the printers dial and LCD to navigate to the “Move” menu.
7. Press and hold the dial button.
8. Release the button when the “Smart config started” message is displayed.
9. Tap the “Connect to WiFi” button and within 10-60 seconds the process should complete.
The printer's LCD will display "Smart config success" when the process is complete.
The phone will display "MP Select Mini is now connected to Wi-Fi."
You will also notice the Select Mini has been assigned an IP Address that is displayed at the top of the printer's display.
Note: If the "Smart config started" message does not stay after releasing the button you can hold the button down through the whole process and the message will disappear once the WiFi is connected.
Trouble connecting?
If the correct SSID is not displayed, go to the phones WiFi settings and switch to the appropriate wireless network.
WiFi and USB cannot access the printer simultaneously.
Disconnect USB cable from the printer if you want to use the WiFi function.
WiFi works with 2.4 GHz b/g/n networks only.
If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer to your wireless network.
For the initial WiFi setup try moving the printer closer to the WiFi router.
Follow the steps below to get your Select Mini connected to your existing 2.4 GHz wireless network.
1. Disconnect USB cable from the printer
2. Turn on the MP Select Mini.
3. Open the MP 3D Printer WiFi Connect App.
4. Verify the correct SSID is displayed.
5. Enter wireless network password.
6. Use the printers dial and LCD to navigate to the “Move” menu.
7. Press and hold the dial button.
8. Release the button when the “Smart config started” message is displayed.
9. Tap the “Connect to WiFi” button and within 10-60 seconds the process should complete.
The printer's LCD will display "Smart config success" when the process is complete.
The phone will display "MP Select Mini is now connected to Wi-Fi."
You will also notice the Select Mini has been assigned an IP Address that is displayed at the top of the printer's display.
Note: If the "Smart config started" message does not stay after releasing the button you can hold the button down through the whole process and the message will disappear once the WiFi is connected.
Trouble connecting?
If the correct SSID is not displayed, go to the phones WiFi settings and switch to the appropriate wireless network.
WiFi and USB cannot access the printer simultaneously.
Disconnect USB cable from the printer if you want to use the WiFi function.
WiFi works with 2.4 GHz b/g/n networks only.
If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer to your wireless network.
For the initial WiFi setup try moving the printer closer to the WiFi router.
MP 3D Printer WiFi Connect 1.0 アップデート
MP 3D Printer WiFI Connect will make connecting your MP Select Mini 3D Printer to WiFi a quick and painless process.
続きを読む
MP 3D Printer WiFi Connect 特徴
バージョン履歴 もっと見る
MP 3D Printer WiFi Connect
1.0
APK
2017年06月05日
1.09 MB
Requires Android: Android 4.1+
Screen DPI: 160-640dpi
SHA1: ff26c692258f798abc83eeeadba605db4227810c
Size: 1.09 MB
What's New:
MP 3D Printer WiFI Connect will make connecting your MP Select Mini 3D Printer to WiFi a quick and painless process.
追加情報
更新日:
2017-04-27
最新バージョン:
1.0
バージョンアップ申請:
Android要件:
Android 4.1+
報告:
