MP 3D Printer WiFi Connect
6.2 7
v1.0 von Matthew Upp
- Startseite
- Apps
- Tools
- MP 3D Printer WiFi Connect
Über MP 3D Printer WiFi Connect
MP 3D Printer WiFi Connect (Paketname: com.mpselectmini.matthewupp.mp3dprinterwificonnect) wird von Matthew Upp entwickelt und die neueste Version von MP 3D Printer WiFi Connect 1.0 wurde am 27. April 2017 aktualisiert. MP 3D Printer WiFi Connect liegt in der Kategorie von Tools. Sie können alle Apps von dem Entwickler der MP 3D Printer WiFi Connect durchsuchen. Derzeit ist diese APP kostenlos. Diese App kann auf Android 4.1+ auf APKFab oder Google Play heruntergeladen werden. Alle APK/XAPK Dateien auf APKFab.com sind original und 100% sicher, schnell herunterzuladen.
MP 3D Printer WiFI Connect will make connecting your Monoprice Select Mini 3D Printer to WiFi a quick and painless process.
Follow the steps below to get your Select Mini connected to your existing 2.4 GHz wireless network.
1. Disconnect USB cable from the printer
2. Turn on the MP Select Mini.
3. Open the MP 3D Printer WiFi Connect App.
4. Verify the correct SSID is displayed.
5. Enter wireless network password.
6. Use the printers dial and LCD to navigate to the “Move” menu.
7. Press and hold the dial button.
8. Release the button when the “Smart config started” message is displayed.
9. Tap the “Connect to WiFi” button and within 10-60 seconds the process should complete.
The printer's LCD will display "Smart config success" when the process is complete.
The phone will display "MP Select Mini is now connected to Wi-Fi."
You will also notice the Select Mini has been assigned an IP Address that is displayed at the top of the printer's display.
Note: If the "Smart config started" message does not stay after releasing the button you can hold the button down through the whole process and the message will disappear once the WiFi is connected.
Trouble connecting?
If the correct SSID is not displayed, go to the phones WiFi settings and switch to the appropriate wireless network.
WiFi and USB cannot access the printer simultaneously.
Disconnect USB cable from the printer if you want to use the WiFi function.
WiFi works with 2.4 GHz b/g/n networks only.
If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer to your wireless network.
For the initial WiFi setup try moving the printer closer to the WiFi router.
Follow the steps below to get your Select Mini connected to your existing 2.4 GHz wireless network.
1. Disconnect USB cable from the printer
2. Turn on the MP Select Mini.
3. Open the MP 3D Printer WiFi Connect App.
4. Verify the correct SSID is displayed.
5. Enter wireless network password.
6. Use the printers dial and LCD to navigate to the “Move” menu.
7. Press and hold the dial button.
8. Release the button when the “Smart config started” message is displayed.
9. Tap the “Connect to WiFi” button and within 10-60 seconds the process should complete.
The printer's LCD will display "Smart config success" when the process is complete.
The phone will display "MP Select Mini is now connected to Wi-Fi."
You will also notice the Select Mini has been assigned an IP Address that is displayed at the top of the printer's display.
Note: If the "Smart config started" message does not stay after releasing the button you can hold the button down through the whole process and the message will disappear once the WiFi is connected.
Trouble connecting?
If the correct SSID is not displayed, go to the phones WiFi settings and switch to the appropriate wireless network.
WiFi and USB cannot access the printer simultaneously.
Disconnect USB cable from the printer if you want to use the WiFi function.
WiFi works with 2.4 GHz b/g/n networks only.
If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer to your wireless network.
For the initial WiFi setup try moving the printer closer to the WiFi router.
MP 3D Printer WiFi Connect 1.0 Update
MP 3D Printer WiFI Connect will make connecting your MP Select Mini 3D Printer to WiFi a quick and painless process.
Mehr lesen
MP 3D Printer WiFi Connect Besonderheiten
Ähnliche Videos
Frühere Versionen Mehr
MP 3D Printer WiFi Connect
1.0
APK
5. Juni 2017
1.09 MB
Requires Android: Android 4.1+
Screen DPI: 160-640dpi
SHA1: ff26c692258f798abc83eeeadba605db4227810c
Size: 1.09 MB
What's New:
MP 3D Printer WiFI Connect will make connecting your MP Select Mini 3D Printer to WiFi a quick and painless process.
Mehr Information
Aktualisierungsdatum:
2017-04-27
Letzte Version:
1.0
Update brauchen:
Anforderungen:
Android 4.1+
Meldung:
Dir könnte auch gefallen
Google Play-Dienste
Google Play-Dienste: Unverzichtbare Systemkomponente für optimale App-Performance und -Funktionalität.
8.7 3M+
Clean Master - Antivirus, AppLock + Bereiniger
Android-Bereiniger mit AppLock und Antivirus, um dein Telefon zu optimieren.
9.4 3M+
Telefon App von Google
Die Telefon App von Google bietet effizienten Spamschutz und intuitive Anrufverwaltung.
8.8 3M+
Google ist eine leistungsstarke Suchmaschine, die schnelle, relevante Ergebnisse und personalisierte Informationen bietet.
8.2 2M+
Security Master - Antivirus, AppLock, Booster
Hol dir 💯 Sicherheit mit Antivirus, VPN, AppLock & WLAN-Schutz!
9.3 1M+
SHAREit: Dateien übertragen und teilen
SHAREit: Blitzschneller, plattformübergreifender Datenaustausch ohne Qualitätsverlust.
8.7 1M+