MQTT Alarm Control Panel
8.8 12
v1.1.2 Build 1 di ThanksMister LLC
Su Pannello Allarme
MQTT Alarm Control Panel
Reuse and old Android devices as a home alarm control panel that integrates with Home Assistant or any home automation platform that supports MQTT messaging.
MQTT Alarm Control Panel is an alarm control panel for use with home automation platforms that support MQTT messaging. The application was originally built for Home Assistant'sMQTT Manual Control Panel. However, the application can be used with any home automation platform that supports the MQTT messaging protocol such as Jeedom, openHab, or Node-Red.
The alarm control panel acts as an interface for your home alarm system and allows for two way communication using MQTT. You can set the alarm state to away or home, or disarm the alarm using a code. Your home automation system controls the sensors or automation that triggers the siren or notifies users of possible intrusion.
Features
* Stream video, detect motion, detect faces, and read QR Codes.
* Capture and emailing images when the alarm is disabled.
MQTT commands to remotely control the application (speak text, play audio, display notifications, alerts).
* Device sensor data reporting over MQTT (temperature, light, pressure, battery, etc.).
* Day/Night mode themes based on MQTT sun value.
* Fingerprint unlock support to disable the alarm. (on supported devices).
* Optional screensaver mode using a digital clock or Imgur images.
* Three day MQTT Weather forecast.
* Home Automation Platform webpage support for viewing home automation dashboards.
The alarm panel is designed to be used as a dedicated device which runs continuously in full-screen mode. The alarm panel is open source and available on GitHub. There is also a version that runs on a Raspberry Pi using Android Things
For the complete setup instructions and additional information, please visit the Project Home Page. If you have any questions, please visit the Thanksmister Community.
Home Assistant
Home Assistant's MQTT Manual Alarm Control Panel
Project's Home Page
Raspberry Pi Version
Thanksmister Community
Support: mister@thanksmister.com
Reuse and old Android devices as a home alarm control panel that integrates with Home Assistant or any home automation platform that supports MQTT messaging.
MQTT Alarm Control Panel is an alarm control panel for use with home automation platforms that support MQTT messaging. The application was originally built for Home Assistant'sMQTT Manual Control Panel. However, the application can be used with any home automation platform that supports the MQTT messaging protocol such as Jeedom, openHab, or Node-Red.
The alarm control panel acts as an interface for your home alarm system and allows for two way communication using MQTT. You can set the alarm state to away or home, or disarm the alarm using a code. Your home automation system controls the sensors or automation that triggers the siren or notifies users of possible intrusion.
Features
* Stream video, detect motion, detect faces, and read QR Codes.
* Capture and emailing images when the alarm is disabled.
MQTT commands to remotely control the application (speak text, play audio, display notifications, alerts).
* Device sensor data reporting over MQTT (temperature, light, pressure, battery, etc.).
* Day/Night mode themes based on MQTT sun value.
* Fingerprint unlock support to disable the alarm. (on supported devices).
* Optional screensaver mode using a digital clock or Imgur images.
* Three day MQTT Weather forecast.
* Home Automation Platform webpage support for viewing home automation dashboards.
The alarm panel is designed to be used as a dedicated device which runs continuously in full-screen mode. The alarm panel is open source and available on GitHub. There is also a version that runs on a Raspberry Pi using Android Things
For the complete setup instructions and additional information, please visit the Project Home Page. If you have any questions, please visit the Thanksmister Community.
Home Assistant
Home Assistant's MQTT Manual Alarm Control Panel
Project's Home Page
Raspberry Pi Version
Thanksmister Community
Support: mister@thanksmister.com
Aggiornamento Pannello Allarme 1.1.2 Build 1
Only a minor update for reporting crashes
Leggi di Più
Caratteristiche Pannello Allarme
Versioni Precedenti
Altro
Requires Android: Android 4.4+
Screen DPI: 120-640dpi
SHA1: 5597f7d65093db52776bf9a5c81827dded8cc9a9
Size: 9.32 MB
What's New:
Only a minor update for reporting crashes
Requires Android: Android 4.4+
Screen DPI: 120-640dpi
SHA1: d286fd347d482a879a2cb9c4c9032d898f36b952
Size: 9.29 MB
What's New:
Fixed issue with using codes starting with the number 0.
Requires Android: Android 4.4+
Screen DPI: 120-640dpi
SHA1: f5a5b4b3122802474a12bdd792ff821307fa89e4
Size: 9.29 MB
What's New:
This release contains a few bug fixes and improvements. Please let us know if you have any issues.
Requires Android: Android 4.4+
Screen DPI: 120-640dpi
SHA1: 1b2fc4191c7f855eb59eb5aaf33f09ad580689fe
Size: 9.28 MB
What's New:
This release contains a few bug fixes and improvements. Please let us know if you have any issues.
Maggiori Informazioni
Nome Pacchetto:
Categoria:
Data Aggiornamento:
2021-08-30
Ultima Versione:
1.1.2 Build 1
Aggiornamento Necessario:
Requisiti:
Android 4.4+
Rapporto:
Sicuro da Scaricare
APKFab.com e il link per il download di questa app sono sicuri al 100%. Tutti i link per il download delle app elencate su APKFab.com provengono da Google Play Store o sono inviati dagli utenti. Per le app da Google Play Store, APKFab.com non le modificherà in alcun modo. Per le app inviate dagli utenti, APKFab.com verificherà la sicurezza della firma APK prima di rilasciarle sul nostro sito web.