G-NetWiFi
9.3 10
v5.6 by GyokovSolutions
About G-NetWiFi
G-NetWiFi (Package Name: com.gyokovsolutions.gnetwifi) is developed by GyokovSolutions and the latest version of G-NetWiFi 5.6 was updated on September 20, 2025. G-NetWiFi is in the category of Tools. You can check all apps from the developer of G-NetWiFi and find 200 alternative apps to G-NetWiFi on Android. Currently this app is for free. This app can be downloaded on Android 6.0+ on APKFab or Google Play. All APK/XAPK files on APKFab.com are original and 100% safe with fast download.
G-NetWiFi is a WiFi network monitor and drive test tool for Android OS devices. It allows monitoring and logging of WiFi network parameters without using special equipment. It's a tool and it's a toy. It can be used by professionals to get better insight on the network or by radio enthusiasts to learn more about WiFi networks.
G-NetWifi can be used in outdoor and in indoor environment with loading of floorplans.
The main features of G-NetWiFi are:
- measuring of WiFi network parameters
- logging of measured values in text and kml files
- displaying measured values on map view
- auto connect to best configured WiFi - in Settings - Other
The app uses runtime permissions. Grant needed permissions in Menu - App permissions in order to use all app features.
Get G-NetWiFi Pro version:
Google Play: http://play.google.com/store/apps/details?id=com.gyokovsolutions.gnetwifipro
G-NetWiFi Pro - additional features:
- WiFi scan logging
- Data test (ping, upload, download)
- Data sequence
- loading of cellfile and displaying WiFi access points and serving cell line on map
- Scan only configured WiFi
- Change WiFi AP color
- Extended kml export
- Predefined routes load
- Auto add new WiFi AP to cellfile
- Import/export app settings
- Extended text logging
- Change app folder
- Log reduction factor
2. Tabs
2.1. WIFI Tab
WIFI tab shows network and geographical information.
2.2 SCAN Tab
SCAN tab shows information about neighbor WIFI AP measurements.
You can change the chart to show all WiFi or only configured WiFi via the button under the chart.
2.3 MAP tab
MAP tab shows geographical view of the measurements and WiFi access points
2.4 INFO tab
The INFO tab provides miscellaneous information.
2.5 DRIVE tab
DRIVE tab represent the main serving AP information
Cellfile
Create cellfile and put it into folder G_NetWiFi_Logs/cellfile.
Here is a sample cellfile: http://www.gyokovsolutions.com/downloads/G-NetWiFi/cellfile.txt
INDOOR MODE
How to use indoor mode:
1. Go to Settings and activate INDOOR MODE
2. On Map the button [Set Point] and center point will appear
3. Point your current location on the map center and press [Set Point] - a marker will appear on the map
4. Move to the next point. Center map on it and press [Set Point] - several new markers (one for each second) will appear connecting previous and current location
5. Go through the route putting points when you change direction.
6. You can clear the markers using [CLR] button
AUTO INDOOR mode allows auto filling of measurement points when the GPS fix is not available like in tunnels or on places with bad GPS reception.
AUTO INDOOR mode works only when the log is active.
If INDOOR mode is selected AUTO INDOOR mode is not activated.
How to use it:
1. Enable AUTO INDOOR mode in Settings.
2. Choose threshold for GPS validity
3. Start log.
4. When you enter the tunnel and lose GPS fix the GPS writing on upper right corner of MAP tab will color in blue which means that AUTO INDOOR mode is active and measurements are collected.
5. When you go out of the tunnel and GPS fix is valid the values for GPS accuracy and time are colored in green, the exiting point is auto set and the missing measurements between entering and exiting point are shown on the map and filled in the log.
Floorplans
How to load floorplans:
1. In folder G_NetWiFi_Logs/floorplan put the floorplan images and create text index file (index.txt) with rows for each image and following content (tab delimited)
imagename longitudeSW latitudeSW longitudeNE latitudeNE
where SW and NE are South - West corner and North - East corner.
2. Go to Menu - Load Floorplan. The floorplans will be shown on map and you can change the floor with the help of the Floor button - next to CLR button
Here you can download floorplan sample: http://www.gyokovsolutions.com/downloads/G-NetTrack/floorplan.rar
App privacy policy - https://sites.google.com/view/gyokovsolutions/g-netwifi-privacy-policy
G-NetWifi can be used in outdoor and in indoor environment with loading of floorplans.
The main features of G-NetWiFi are:
- measuring of WiFi network parameters
- logging of measured values in text and kml files
- displaying measured values on map view
- auto connect to best configured WiFi - in Settings - Other
The app uses runtime permissions. Grant needed permissions in Menu - App permissions in order to use all app features.
Get G-NetWiFi Pro version:
Google Play: http://play.google.com/store/apps/details?id=com.gyokovsolutions.gnetwifipro
G-NetWiFi Pro - additional features:
- WiFi scan logging
- Data test (ping, upload, download)
- Data sequence
- loading of cellfile and displaying WiFi access points and serving cell line on map
- Scan only configured WiFi
- Change WiFi AP color
- Extended kml export
- Predefined routes load
- Auto add new WiFi AP to cellfile
- Import/export app settings
- Extended text logging
- Change app folder
- Log reduction factor
2. Tabs
2.1. WIFI Tab
WIFI tab shows network and geographical information.
2.2 SCAN Tab
SCAN tab shows information about neighbor WIFI AP measurements.
You can change the chart to show all WiFi or only configured WiFi via the button under the chart.
2.3 MAP tab
MAP tab shows geographical view of the measurements and WiFi access points
2.4 INFO tab
The INFO tab provides miscellaneous information.
2.5 DRIVE tab
DRIVE tab represent the main serving AP information
Cellfile
Create cellfile and put it into folder G_NetWiFi_Logs/cellfile.
Here is a sample cellfile: http://www.gyokovsolutions.com/downloads/G-NetWiFi/cellfile.txt
INDOOR MODE
How to use indoor mode:
1. Go to Settings and activate INDOOR MODE
2. On Map the button [Set Point] and center point will appear
3. Point your current location on the map center and press [Set Point] - a marker will appear on the map
4. Move to the next point. Center map on it and press [Set Point] - several new markers (one for each second) will appear connecting previous and current location
5. Go through the route putting points when you change direction.
6. You can clear the markers using [CLR] button
AUTO INDOOR mode allows auto filling of measurement points when the GPS fix is not available like in tunnels or on places with bad GPS reception.
AUTO INDOOR mode works only when the log is active.
If INDOOR mode is selected AUTO INDOOR mode is not activated.
How to use it:
1. Enable AUTO INDOOR mode in Settings.
2. Choose threshold for GPS validity
3. Start log.
4. When you enter the tunnel and lose GPS fix the GPS writing on upper right corner of MAP tab will color in blue which means that AUTO INDOOR mode is active and measurements are collected.
5. When you go out of the tunnel and GPS fix is valid the values for GPS accuracy and time are colored in green, the exiting point is auto set and the missing measurements between entering and exiting point are shown on the map and filled in the log.
Floorplans
How to load floorplans:
1. In folder G_NetWiFi_Logs/floorplan put the floorplan images and create text index file (index.txt) with rows for each image and following content (tab delimited)
imagename longitudeSW latitudeSW longitudeNE latitudeNE
where SW and NE are South - West corner and North - East corner.
2. Go to Menu - Load Floorplan. The floorplans will be shown on map and you can change the floor with the help of the Floor button - next to CLR button
Here you can download floorplan sample: http://www.gyokovsolutions.com/downloads/G-NetTrack/floorplan.rar
App privacy policy - https://sites.google.com/view/gyokovsolutions/g-netwifi-privacy-policy
G-NetWiFi 5.6 Update
G-NetWiFi is a WiFi network monitor and drive test tool.Get the Pro version for more features.
v5.6
- Android 15 ready
v4.5
- updated for Android 13 - to show notifications - enable notification permission from Menu - App permissions
v4.4
- Menu - Remove ads
v4.3
- fixed bug for Android 10 devices
v4.2
- change charts size
v4.1
- option in Settings - Log parameters to use more accessible device documents folder as logfiles folder
Read More
G-NetWiFi Features
Related Videos
G-NetWiFi video demonstration
Previous Versions
More
Requires Android: Android 6.0+
Screen DPI: 120-640dpi
SHA1: 3ec922031423fceba278b8df2e65f86b049927b7
Size: 3.17 MB
What's New:
G-NetWiFi is a WiFi network monitor and drive test tool.
Get the Pro version for more features.
v5.6
- Android 15 ready
v4.5
- updated for Android 13 - to show notifications - enable notification permission from Menu - App permissions
v4.4
- Menu - Remove ads
v4.3
- fixed bug for Android 10 devices
v4.2
- change charts size
v4.1
- option in Settings - Log parameters to use more accessible device documents folder as logfiles folder
Get the Pro version for more features.
v5.6
- Android 15 ready
v4.5
- updated for Android 13 - to show notifications - enable notification permission from Menu - App permissions
v4.4
- Menu - Remove ads
v4.3
- fixed bug for Android 10 devices
v4.2
- change charts size
v4.1
- option in Settings - Log parameters to use more accessible device documents folder as logfiles folder
Requires Android: Android 6.0+
Screen DPI: 120-640dpi
SHA1: c4fc4afacbceb9f80daad6f6234a786ab971070c
Size: 3.17 MB
What's New:
G-NetWiFi is a WiFi network monitor and drive test tool.
Get the Pro version for more features.
v5.5
- Android 15 ready
v4.5
- updated for Android 13 - to show notifications - enable notification permission from Menu - App permissions
v4.4
- Menu - Remove ads
v4.3
- fixed bug for Android 10 devices
v4.2
- change charts size
v4.1
- option in Settings - Log parameters to use more accessible device documents folder as logfiles folder
Get the Pro version for more features.
v5.5
- Android 15 ready
v4.5
- updated for Android 13 - to show notifications - enable notification permission from Menu - App permissions
v4.4
- Menu - Remove ads
v4.3
- fixed bug for Android 10 devices
v4.2
- change charts size
v4.1
- option in Settings - Log parameters to use more accessible device documents folder as logfiles folder
Requires Android: Android 6.0+
Screen DPI: 120-640dpi
SHA1: 9055654c199e506b6b87cf37e23fa27efeb7c400
Size: 3.09 MB
What's New:
G-NetWiFi is a WiFi network monitor and drive test tool.
Get the Pro version for more features.
v5.2
- Android 14 ready
v4.5
- updated for Android 13 - to show notifications - enable notification permission from Menu - App permissions
v4.4
- Menu - Remove ads
v4.3
- fixed bug for Android 10 devices
v4.2
- change charts size
v4.1
- option in Settings - Log parameters to use more accessible device documents folder as logfiles folder
Get the Pro version for more features.
v5.2
- Android 14 ready
v4.5
- updated for Android 13 - to show notifications - enable notification permission from Menu - App permissions
v4.4
- Menu - Remove ads
v4.3
- fixed bug for Android 10 devices
v4.2
- change charts size
v4.1
- option in Settings - Log parameters to use more accessible device documents folder as logfiles folder
Requires Android: Android 6.0+
Screen DPI: 120-640dpi
SHA1: 961dbc8408081ad9ce16b9d0fab343c8d1033f63
Size: 3.09 MB
What's New:
G-NetWiFi is a WiFi network monitor and drive test tool.
Get the Pro version for more features.
v4.6
- Android 14 ready
v4.5
- updated for Android 13 - to show notifications - enable notification permission from Menu - App permissions
v4.4
- Menu - Remove ads
v4.3
- fixed bug for Android 10 devices
v4.2
- change charts size
v4.1
- option in Settings - Log parameters to use more accessible device documents folder as logfiles folder
Get the Pro version for more features.
v4.6
- Android 14 ready
v4.5
- updated for Android 13 - to show notifications - enable notification permission from Menu - App permissions
v4.4
- Menu - Remove ads
v4.3
- fixed bug for Android 10 devices
v4.2
- change charts size
v4.1
- option in Settings - Log parameters to use more accessible device documents folder as logfiles folder
More Information
Package Name:
Update Date:
2025-09-20
Latest Version:
5.6
Need Update:
Available on:
Requirements:
Android 6.0+
Report:
Safe to Download
APKFab.com and the download link of this app are 100% safe. All download links of apps listed on APKFab.com are from Google Play Store or submitted by users. For the app from Google Play Store, APKFab.com won't modify it in any way. For the app submitted by users, APKFab.com will verify its APK signature safety before release it on our website.