Ampere
9.1 23K+
v4.35.10 by Brain_trapp
About Ampere
Ampere (Package Name: com.gombosdev.ampere) is developed by Brain_trapp and the latest version of Ampere v4.35.10 was updated on August 31, 2025. Ampere is in the category of Tools. You can check all apps from the developer of Ampere and find 193 alternative apps to Ampere on Android. Currently this app is for free. This app can be downloaded on Android 6.0+ on APKFab or Google Play. All APK/XAPK files on APKFab.com are original and 100% safe with fast download.
Did you ever felt, that one Charger/USB cable set charges your device really fast and the other not? Now, you can prove this with Ampere.
Measure the charging and discharging current of your battery.
PRO features:
- Widgets
- Notification
- Alerts on device
- Alerts on Android Wear
Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.
The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.
----
Please read also the FAQ: http://goo.gl/R8XgXX
----
Start the app and wait ca. 10 seconds ("measuring" is on the display). After this time, the charging or discharging current will be shown.
The current depends on many things:
- Charger (USB/AC/Wireless)
- USB cable
- Phone type
- Current tasks running
- Display brightness
- WiFi state
- GPS state
Please don't use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.
If the app shows 0mA all the time, please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.
Unfortunately some Samsung devices don't give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.
----
Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.
If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).
----
Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.
----
LiPo batteries don't draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.
- A graph explaining LiPo charge stages: http://batteryuniversity.com/_img/content/ion1.jpg
- Dave's (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk
----
Phones/ROMS compatible only with "Old measurement method" switched on and selected the right "Measurement interface":
➤ HTC One M7 / M8
➤ LG G3
Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime - fortuna3gdtv
➤ Galaxy Note2 - t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 - d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 - degas3g
➤ HTC Desire 510 - htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G - pyramid
Please do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measurement yet.
If the app doesn't work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: http://goo.gl/pZqJg8 . Please post your problem with screenshots in the XDA thread.
Please read also the FAQ: http://goo.gl/R8XgXX
Measure the charging and discharging current of your battery.
PRO features:
- Widgets
- Notification
- Alerts on device
- Alerts on Android Wear
Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.
The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.
----
Please read also the FAQ: http://goo.gl/R8XgXX
----
Start the app and wait ca. 10 seconds ("measuring" is on the display). After this time, the charging or discharging current will be shown.
The current depends on many things:
- Charger (USB/AC/Wireless)
- USB cable
- Phone type
- Current tasks running
- Display brightness
- WiFi state
- GPS state
Please don't use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.
If the app shows 0mA all the time, please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.
Unfortunately some Samsung devices don't give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.
----
Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.
If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).
----
Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.
----
LiPo batteries don't draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.
- A graph explaining LiPo charge stages: http://batteryuniversity.com/_img/content/ion1.jpg
- Dave's (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk
----
Phones/ROMS compatible only with "Old measurement method" switched on and selected the right "Measurement interface":
➤ HTC One M7 / M8
➤ LG G3
Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime - fortuna3gdtv
➤ Galaxy Note2 - t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 - d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 - degas3g
➤ HTC Desire 510 - htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G - pyramid
Please do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measurement yet.
If the app doesn't work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: http://goo.gl/pZqJg8 . Please post your problem with screenshots in the XDA thread.
Please read also the FAQ: http://goo.gl/R8XgXX
Read More
Ampere Features
Previous Versions
More
Requires Android: Android 6.0+
Architecture: arm64-v8a, armeabi-v7a, x86, x86_64
Screen DPI: nodpi
SHA1: bde4daf66068be95d50bce1fe33df11a654cc279
Size: 17.52 MB
Variant
Arch
Version
DPI
288
August 25, 2025
Ampere
v4.35.9
(288)
Requires Android: Android 6.0+
Architecture: arm64-v8a, armeabi-v7a, x86, x86_64
Screen DPI: nodpi
SHA1: 4994f259905e88e34f517465e94d77ebbee07d38
Size: 16.59 MB
What's New:
v4.35.9
* Experimental option: Show charging/discharging power in watts
* Bug fixes and enhancements
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
* Experimental option: Show charging/discharging power in watts
* Bug fixes and enhancements
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
arm64-v8a, armeabi-v7a, x86, x86_64
Android 6.0+
nodpi
288
September 7, 2025
Ampere
v4.35.9
(288)
Requires Android: Android 6.0+
Architecture: arm64-v8a, armeabi-v7a, x86, x86_64
Screen DPI: nodpi
SHA1: 53cd637f23866f797355ef6eb83e4698c48385d5
Size: 16.59 MB
What's New:
v4.35.9
* Experimental option: Show charging/discharging power in watts
* Bug fixes and enhancements
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
* Experimental option: Show charging/discharging power in watts
* Bug fixes and enhancements
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
arm64-v8a, armeabi-v7a, x86, x86_64
Android 6.0+
nodpi
Variant
Arch
Version
DPI
287
June 3, 2025
Ampere
v4.35.8
(287)
Requires Android: Android 6.0+
Architecture: arm64-v8a, armeabi-v7a, x86, x86_64
Screen DPI: nodpi
SHA1: 6d76b75d17e35a61d036569458e145836b8d7ab7
Size: 16.85 MB
What's New:
v4.35.8
* Dark mode enhanced
* Layout changes for tablets
* Bug fixes and enhancements
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
* Dark mode enhanced
* Layout changes for tablets
* Bug fixes and enhancements
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
arm64-v8a, armeabi-v7a, x86, x86_64
Android 6.0+
nodpi
287
June 5, 2025
Ampere
v4.35.8
(287)
Requires Android: Android 6.0+
Architecture: arm64-v8a, armeabi-v7a, x86, x86_64
Screen DPI: nodpi
SHA1: d543a688532ac76cbb4b479604f9db013586f16d
Size: 16.85 MB
What's New:
v4.35.8
* Dark mode enhanced
* Layout changes for tablets
* Bug fixes and enhancements
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
* Dark mode enhanced
* Layout changes for tablets
* Bug fixes and enhancements
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
arm64-v8a, armeabi-v7a, x86, x86_64
Android 6.0+
nodpi
Requires Android: Android 6.0+
Architecture: arm64-v8a, armeabi-v7a, x86, x86_64
Screen DPI: nodpi
SHA1: f03f7ddbb8b3182e37989d89876b66037b58ccdf
Size: 16.74 MB
What's New:
v4.35.7
* Dark mode enhanced
* Layout changes for tablets
* Bug fixes and enhancements
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
* Dark mode enhanced
* Layout changes for tablets
* Bug fixes and enhancements
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
More Information
Package Name:
Update Date:
2025-08-31
Latest Version:
v4.35.10
Need Update:
Available on:
Requirements:
Android 6.0+
Report:
Safe to Download
APKFab.com and the download link of this app are 100% safe. All download links of apps listed on APKFab.com are from Google Play Store or submitted by users. For the app from Google Play Store, APKFab.com won't modify it in any way. For the app submitted by users, APKFab.com will verify its APK signature safety before release it on our website.