Vaper's Toolbox
8.4 206
v4.1 by Valkyrie Software
關於 Vaper's Toolbox
Vaper's Toolbox（包名：com.valsoft.vaperstoolbox）開發者是Valkyrie Software，Vaper's Toolbox的最新版本4.1更新時間為2016年01月24日。Vaper's Toolbox的分類是工具。您可以查看Vaper's Toolbox的開發者下的所有應用。目前這個應用免費。該應用可以從APKFab或Google Play下載到Android 2.1+。APKFab.com的所有APK/XAPK文檔都是原始文檔並且100%安全下載的資源。
Vaper's Toolbox was designed specifically for those vaper's who are wanting to build their own coils. It helps newcomers and experts alike with the complex calculations required to build the perfect coil. It currently consists of four tools:
1. Wire Cutter helps you calculate how long each piece of coil wire needs to be to achieve the proper resistance. Supports single, dual, triple, and quad coil design. Wire types supported are Kanthal (A-1, A, and D), Nichrome (60 and 80), SS (304, 316, 316L), NI200, and T1 as well as Kanthal A-1 Ribbon wire. It can also display calculated lengths in inches, cm, mm, and even fractional inches (4 3/16).
2. Coil Builder helps determine how many wraps the coil needs to be using the correct length of wire.
Using the wire length from Wire Cutter along with the coil diameter and estimated length of the leads, it will calculate the exact number of wraps you should use. Diameter size can be input as inches, cm, or mm, and can be set independently of the length settings.
3. Power Tool calculates either voltage or wattage at which you are vaping based on your inputs and setting.
Basically a simple Ohm's Law calculator designed to help determine the power or voltage you should use.
4. Converter is a new conversion tool that can convert inches to mm and back as well as convert fractions to decimals.
Try it out. We think you will agree that Vaper's Toolbox is a must have for any e-cigarette enthusiast that is planning on building their own coils.
This app should work with any android version 2.2 or later.
NOTE: The latest update changed the way the Power Tool works. I would like to hear from you what you think of the new design on the Power Tool page. Just shoot me an email. Also if you have any issues or would like to see additional wire types and/or gauges or features added, send me an email.
1. Wire Cutter helps you calculate how long each piece of coil wire needs to be to achieve the proper resistance. Supports single, dual, triple, and quad coil design. Wire types supported are Kanthal (A-1, A, and D), Nichrome (60 and 80), SS (304, 316, 316L), NI200, and T1 as well as Kanthal A-1 Ribbon wire. It can also display calculated lengths in inches, cm, mm, and even fractional inches (4 3/16).
2. Coil Builder helps determine how many wraps the coil needs to be using the correct length of wire.
Using the wire length from Wire Cutter along with the coil diameter and estimated length of the leads, it will calculate the exact number of wraps you should use. Diameter size can be input as inches, cm, or mm, and can be set independently of the length settings.
3. Power Tool calculates either voltage or wattage at which you are vaping based on your inputs and setting.
Basically a simple Ohm's Law calculator designed to help determine the power or voltage you should use.
4. Converter is a new conversion tool that can convert inches to mm and back as well as convert fractions to decimals.
Try it out. We think you will agree that Vaper's Toolbox is a must have for any e-cigarette enthusiast that is planning on building their own coils.
This app should work with any android version 2.2 or later.
NOTE: The latest update changed the way the Power Tool works. I would like to hear from you what you think of the new design on the Power Tool page. Just shoot me an email. Also if you have any issues or would like to see additional wire types and/or gauges or features added, send me an email.
Vaper's Toolbox 4.1 更新
Changed the look of the Power Tool to be an Ohms Law wheel. Change any value and the rest are updated. Resistance is the key value and will only change when you change it on the Power Tool tab or the Wire Cutter tab.Fixed a bug that caused crashes in countries that use a comma for decimals
Fixed a bug that caused crashes selecting the highest 3 gauges, and prevented the app from opening.
Fixed a bug that caused the app to forget previous gauge settings when scrolling to a different tab and back
查看更多
Vaper's Toolbox 資訊
歷史版本
更多
Requires Android: Android 2.1+
Screen DPI: 160-480dpi
SHA1: 1cadf04ecebcef372f933c01e2d1411b931bf54f
Size: 447.3 KB
What's New:
Changed the look of the Power Tool to be an Ohms Law wheel. Change any value and the rest are updated. Resistance is the key value and will only change when you change it on the Power Tool tab or the Wire Cutter tab.
Fixed a bug that caused crashes in countries that use a comma for decimals
Fixed a bug that caused crashes selecting the highest 3 gauges, and prevented the app from opening.
Fixed a bug that caused the app to forget previous gauge settings when scrolling to a different tab and back
Fixed a bug that caused crashes in countries that use a comma for decimals
Fixed a bug that caused crashes selecting the highest 3 gauges, and prevented the app from opening.
Fixed a bug that caused the app to forget previous gauge settings when scrolling to a different tab and back
Requires Android: Android 2.1+
Screen DPI: 160-480dpi
SHA1: 62fd68aea681af3420997af8c2c4bc5a84081320
Size: 417.96 KB
What's New:
Jan 22, 2016: Lots of new wires for TC mods!!! (NI200, T1, SS304, SS316, SS316L).
I also changed the way I add new wires, it is a LOT easier now. If you need additional wires or gauges just send me an email. Please include the wire type and specific gauge range you are requesting.
I also changed the way I add new wires, it is a LOT easier now. If you need additional wires or gauges just send me an email. Please include the wire type and specific gauge range you are requesting.
Requires Android: Android 2.1+
Screen DPI: 160-480dpi
SHA1: c61451bcca42f011658b32833d205296bd711d49
Size: 422.75 KB
What's New:
April 22, 2014: Ribbon Wire!!! We have added support for 6 sizes of Kanthal A-1 Ribbon wire.
NOTE: For the new wire we pulled the resistance values from temcoindustrialpower but we have noticed some differences from these values and what some other sites list for the same wire. If you find that any of these values are indeed wrong, PLEASE let us know and we will correct it.
Ohms/ft
.04 x .01mm - 11.4
.05 x .01mm - 9.2
.06 x .01mm - 7.68
.07 x .01mm - 6.58
.08 x .01mm - 5.76
.09 x .01mm - 5.12
更多資訊
更新日期:
2016-01-24
最新版本:
4.1
請求更新:
系統要求:
Android 2.1+
舉報:
安全下載
APKFab.com和該應用的下載連結是100%安全的。APKFab.com上列出的所有應用下載連結均來自Google Play Store或由用戶提交。對於來自Google Play商店的應用，APKFab.com不會對其進行任何形式的修改。對於用戶提交的應用，APKFab.com會在網站上發佈之前驗證其APK簽名的安全性。