Thermodo
6.1
v1.7.1 by Robocat
關於 Thermodo
Thermodo（包名：com.robocatapps.thermodo）開發者是Robocat，Thermodo的最新版本1.7.1更新時間為2016年03月28日。Thermodo的分類是工具。您可以查看Thermodo的開發者下的所有應用。目前這個應用免費。該應用可以從APKFab或Google Play下載到Android 4.1+。APKFab.com的所有APK/XAPK文檔都是原始文檔並且100%安全下載的資源。
THIS APP REQUIRES THE THERMODO HARDWARE THERMOMETER (Available here http://thermodo.com)
Measure the temperature right where you are with the Companion App for Thermodo. Plug the Thermodo in your audio jack and let the sensor adjust to the environment. It's never been more easy to take temperature measurements on the go.
Thermodo is a tiny little electrical thermometer for your smartphone and the Companion app is the first piece of software you'll need to enjoy your new weather gadget.
= The Companion app features =
- Measure the current temperature with Thermodo
- A beautifully clean design when taking measurements
- Get low, high and average temperature of your last measurement by swiping up
- More about the Thermodo project and guides on how to get the most out of your sensitive little thermometer
- Fahrenheit & Celsius support
- Compensate for device heat in the settings
Learn more at http://thermodo.com and get your own Thermodo.
Got questions, check out the FAQ at http://thermodo.com/support
= Important =
We've done our best and have tested Thermodo on a large number of devices, but obviously we cannot test it on every single device out there. If you are having issues please send an e-mail to support@thermodo.com and we will see what we can do.
Currently, there are a couple of known limitations that you should be aware of:
- Thermodo works unreliably when audio enhancers such as "Beats Audio", "Dolby" or similar features are enabled. When using Thermodo, please disable such audio enhancers.
- On some devices the app sometimes cannot ensure that the master volume is set at a reasonable level. If you are having issues with Thermodo not being detected by your phone then go into Settings->Sound->Volumes and make sure the volume for music is set to the maximum value.
Measure the temperature right where you are with the Companion App for Thermodo. Plug the Thermodo in your audio jack and let the sensor adjust to the environment. It's never been more easy to take temperature measurements on the go.
Thermodo is a tiny little electrical thermometer for your smartphone and the Companion app is the first piece of software you'll need to enjoy your new weather gadget.
= The Companion app features =
- Measure the current temperature with Thermodo
- A beautifully clean design when taking measurements
- Get low, high and average temperature of your last measurement by swiping up
- More about the Thermodo project and guides on how to get the most out of your sensitive little thermometer
- Fahrenheit & Celsius support
- Compensate for device heat in the settings
Learn more at http://thermodo.com and get your own Thermodo.
Got questions, check out the FAQ at http://thermodo.com/support
= Important =
We've done our best and have tested Thermodo on a large number of devices, but obviously we cannot test it on every single device out there. If you are having issues please send an e-mail to support@thermodo.com and we will see what we can do.
Currently, there are a couple of known limitations that you should be aware of:
- Thermodo works unreliably when audio enhancers such as "Beats Audio", "Dolby" or similar features are enabled. When using Thermodo, please disable such audio enhancers.
- On some devices the app sometimes cannot ensure that the master volume is set at a reasonable level. If you are having issues with Thermodo not being detected by your phone then go into Settings->Sound->Volumes and make sure the volume for music is set to the maximum value.
Thermodo 1.7.1 更新
New in version 1.7--------------------------
- Measurements are now stored in the app. Tap on the History button (up right corner) to view your previous measurements.
- Export measurements as CSV.
- Other bug fixes and improvements
查看更多
Thermodo 資訊
歷史版本
更多
Requires Android: Android 4.1+
Architecture: arm64-v8a, armeabi, armeabi-v7a, mips, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 288e269a13b5384ace6953ef5afa5b19d54a9217
Size: 12.18 MB
What's New:
New in version 1.7
--------------------------
--------------------------
- Measurements are now stored in the app. Tap on the History button (up right corner) to view your previous measurements.
- Export measurements as CSV.
- Other bug fixes and improvements
Requires Android: Android 4.1+
Architecture: arm64-v8a, armeabi, armeabi-v7a, mips, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 9c3c12463804c1d644fcbeb5ddeee715b5018a64
Size: 12.18 MB
What's New:
New in version 1.7
--------------------------
--------------------------
- Measurements are now stored in the app. Tap on the History button (up right corner) to view your previous measurements.
- Export measurements as CSV.
- Other bug fixes and improvements
Requires Android: Android 4.0.3+
Screen DPI: 160-480dpi
SHA1: d73dd5a63af175021576474ec7824bd9d148c75b
Size: 6.42 MB
What's New:
New in version 1.2
--------------------------
--------------------------
- You can now fine-tune device heat compensation with a slider on the settings page.
- Overall improvements to stability of temperature readings.
- Improved temperature readings Samsung Galaxy S3.
- Improved automatic adjustment of volume. On some models the volume wasn't adjusted
correctly which would degrade measurement quality.
- Fixed an issue with 'Follow on Twitter' button when the native Twitter app wasn't installed.
更多資訊
更新日期:
2016-03-28
最新版本:
1.7.1
請求更新:
系統要求:
Android 4.1+
舉報:
安全下載
APKFab.com和該應用的下載連結是100%安全的。APKFab.com上列出的所有應用下載連結均來自Google Play Store或由用戶提交。對於來自Google Play商店的應用，APKFab.com不會對其進行任何形式的修改。對於用戶提交的應用，APKFab.com會在網站上發佈之前驗證其APK簽名的安全性。