SIMATIC S7
7.1 10
v10.00.05.01 by Siemens AG
關於 S7APP
S7APP（包名：com.siemens.simaticS7）開發者是Siemens AG，S7APP的最新版本10.00.05.01更新時間為2018年06月28日。SIMATIC S7的分類是生產應用。您可以查看SIMATIC S7的開發者下的所有應用並找到SIMATIC S7在安卓上的28個相似應用。目前這個應用免費。該應用可以從APKFab或Google Play下載到Android 4.1+。APKFab.com的所有APK/XAPK文檔都是原始文檔並且100%安全下載的資源。
This application allows users to connect their smart devices to SIMATIC S7-1500, S7-1200, ET 200SP and Open Controller (PN/IO) via WIFI access point.
Features:
• Configure a control page to operate and monitor variables with a set of projectable control-types: gauge, button, slider, bar graph and output field. Of each control type, one control can be configured for free. If more controls of one control type are needed, the respective control type needs to be unlocked via in-app-purchasing once. After unlocking, as many controls of the respective type as desired can be configured. However, the maximum number of controls is limited to 50.
NOTICE: To add controls to the control page an internet connection is needed. Usage of the control page is possible without an internet-connection.
• Change the CPU operating mode (RUN/STOP)
• Read CPU and module diagnostic information and send via email
• Monitor and modify variables or tags in a list (max. 20)
• Display up to 8 variables in a trendview
• S7 Alarming (for firmware versions >= 2.5 of S7-1500)
• Languages: English and German
Compatibility:
The app supports SIMATIC S7-1500 and ET200SP with firmware 1.8 or higher, as well as SIMATIC S7-1200 with firmware 3.0 or higher. Android versions < 4.1 are not supported!
Terms of Use:
By downloading this application you accept the SIEMENS End User License Agreement for mobile applications on https://support.industry.siemens.com/cs/ww/en/view/109480850
You may not use or otherwise export or re-export the application except as authorized by United States law and the laws of the jurisdiction in which the application was obtained. In particular, but without limitation, the application may not be exported or re-exported (a) into any U.S.-embargoed countries or (b) to anyone on the U.S. Treasury Department's Specially Designated Nationals List or the U.S. Department of Commerce Denied Persons List or Entity List.
By using the application, you represent and warrant that you are not located in any such country or on any such list. You also agree that you will not use the application for any purposes prohibited by United States law, including, without limitation, the development, design, manufacture, or production of nuclear, missile, or chemical or biological weapons.
Features:
• Configure a control page to operate and monitor variables with a set of projectable control-types: gauge, button, slider, bar graph and output field. Of each control type, one control can be configured for free. If more controls of one control type are needed, the respective control type needs to be unlocked via in-app-purchasing once. After unlocking, as many controls of the respective type as desired can be configured. However, the maximum number of controls is limited to 50.
NOTICE: To add controls to the control page an internet connection is needed. Usage of the control page is possible without an internet-connection.
• Change the CPU operating mode (RUN/STOP)
• Read CPU and module diagnostic information and send via email
• Monitor and modify variables or tags in a list (max. 20)
• Display up to 8 variables in a trendview
• S7 Alarming (for firmware versions >= 2.5 of S7-1500)
• Languages: English and German
Compatibility:
The app supports SIMATIC S7-1500 and ET200SP with firmware 1.8 or higher, as well as SIMATIC S7-1200 with firmware 3.0 or higher. Android versions < 4.1 are not supported!
Terms of Use:
By downloading this application you accept the SIEMENS End User License Agreement for mobile applications on https://support.industry.siemens.com/cs/ww/en/view/109480850
You may not use or otherwise export or re-export the application except as authorized by United States law and the laws of the jurisdiction in which the application was obtained. In particular, but without limitation, the application may not be exported or re-exported (a) into any U.S.-embargoed countries or (b) to anyone on the U.S. Treasury Department's Specially Designated Nationals List or the U.S. Department of Commerce Denied Persons List or Entity List.
By using the application, you represent and warrant that you are not located in any such country or on any such list. You also agree that you will not use the application for any purposes prohibited by United States law, including, without limitation, the development, design, manufacture, or production of nuclear, missile, or chemical or biological weapons.
S7APP 10.00.05.01 更新
• Security Improvements• Bug fixing
查看更多
S7APP 資訊
歷史版本
更多
Requires Android: Android 4.1+
Architecture: armeabi-v7a
Screen DPI: 120-240dpi
SHA1: 66b5b50627e3a917bfeb98168a7d4fe162771e5d
Size: 34.6 MB
What's New:
• Security Improvements
• Bug fixing
• Bug fixing
Requires Android: Android 4.1+
Architecture: armeabi-v7a
Screen DPI: 120-240dpi
SHA1: bbed7156d357930e0e3a60b315ef501c5fa9197c
Size: 32.79 MB
What's New:
• S7 Alarming
• Security Improvements
• Bug fixing
• Security Improvements
• Bug fixing
Requires Android: Android 4.1+
Architecture: armeabi-v7a
Screen DPI: 120-240dpi
SHA1: 0d0133652dcbbefa77aa89fcf081bab383f89df4
Size: 31.85 MB
What's New:
• Security Improvements
• Bug fixing
• Bug fixing
Requires Android: Android 4.1+
Architecture: armeabi-v7a
Screen DPI: 120-240dpi
SHA1: 713689ed5ec40b5223d047039e526ee913da1b02
Size: 31.63 MB
What's New:
• Bug fixes in Control Page
更多資訊
更新日期:
2018-06-28
最新版本:
10.00.05.01
請求更新:
系統要求:
Android 4.1+
舉報:
安全下載
APKFab.com和該應用的下載連結是100%安全的。APKFab.com上列出的所有應用下載連結均來自Google Play Store或由用戶提交。對於來自Google Play商店的應用，APKFab.com不會對其進行任何形式的修改。對於用戶提交的應用，APKFab.com會在網站上發佈之前驗證其APK簽名的安全性。