MP 3D Printer WiFi Connect
6.2 7
v1.0 by Matthew Upp
關於 MP 3D Printer WiFi Connect
MP 3D Printer WiFi Connect（包名：com.mpselectmini.matthewupp.mp3dprinterwificonnect）開發者是Matthew Upp，MP 3D Printer WiFi Connect的最新版本1.0更新時間為2017年04月27日。MP 3D Printer WiFi Connect的分類是工具。您可以查看MP 3D Printer WiFi Connect的開發者下的所有應用。目前這個應用免費。該應用可以從APKFab或Google Play下載到Android 4.1+。APKFab.com的所有APK/XAPK文檔都是原始文檔並且100%安全下載的資源。
MP 3D Printer WiFI Connect will make connecting your Monoprice Select Mini 3D Printer to WiFi a quick and painless process.
Follow the steps below to get your Select Mini connected to your existing 2.4 GHz wireless network.
1. Disconnect USB cable from the printer
2. Turn on the MP Select Mini.
3. Open the MP 3D Printer WiFi Connect App.
4. Verify the correct SSID is displayed.
5. Enter wireless network password.
6. Use the printers dial and LCD to navigate to the “Move” menu.
7. Press and hold the dial button.
8. Release the button when the “Smart config started” message is displayed.
9. Tap the “Connect to WiFi” button and within 10-60 seconds the process should complete.
The printer's LCD will display "Smart config success" when the process is complete.
The phone will display "MP Select Mini is now connected to Wi-Fi."
You will also notice the Select Mini has been assigned an IP Address that is displayed at the top of the printer's display.
Note: If the "Smart config started" message does not stay after releasing the button you can hold the button down through the whole process and the message will disappear once the WiFi is connected.
Trouble connecting?
If the correct SSID is not displayed, go to the phones WiFi settings and switch to the appropriate wireless network.
WiFi and USB cannot access the printer simultaneously.
Disconnect USB cable from the printer if you want to use the WiFi function.
WiFi works with 2.4 GHz b/g/n networks only.
If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer to your wireless network.
For the initial WiFi setup try moving the printer closer to the WiFi router.
Follow the steps below to get your Select Mini connected to your existing 2.4 GHz wireless network.
1. Disconnect USB cable from the printer
2. Turn on the MP Select Mini.
3. Open the MP 3D Printer WiFi Connect App.
4. Verify the correct SSID is displayed.
5. Enter wireless network password.
6. Use the printers dial and LCD to navigate to the “Move” menu.
7. Press and hold the dial button.
8. Release the button when the “Smart config started” message is displayed.
9. Tap the “Connect to WiFi” button and within 10-60 seconds the process should complete.
The printer's LCD will display "Smart config success" when the process is complete.
The phone will display "MP Select Mini is now connected to Wi-Fi."
You will also notice the Select Mini has been assigned an IP Address that is displayed at the top of the printer's display.
Note: If the "Smart config started" message does not stay after releasing the button you can hold the button down through the whole process and the message will disappear once the WiFi is connected.
Trouble connecting?
If the correct SSID is not displayed, go to the phones WiFi settings and switch to the appropriate wireless network.
WiFi and USB cannot access the printer simultaneously.
Disconnect USB cable from the printer if you want to use the WiFi function.
WiFi works with 2.4 GHz b/g/n networks only.
If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer to your wireless network.
For the initial WiFi setup try moving the printer closer to the WiFi router.
MP 3D Printer WiFi Connect 1.0 更新
MP 3D Printer WiFI Connect will make connecting your MP Select Mini 3D Printer to WiFi a quick and painless process.
查看更多
MP 3D Printer WiFi Connect 資訊
相關視頻
MP 3D Printer WiFi Connect for Android - Monoprice MP Select Mini (V1/V2) & MP Mini Delta
歷史版本
更多
Requires Android: Android 4.1+
Screen DPI: 160-640dpi
SHA1: ff26c692258f798abc83eeeadba605db4227810c
Size: 1.09 MB
What's New:
MP 3D Printer WiFI Connect will make connecting your MP Select Mini 3D Printer to WiFi a quick and painless process.
更多資訊
更新日期:
2017-04-27
最新版本:
1.0
請求更新:
系統要求:
Android 4.1+
舉報:
安全下載
APKFab.com和該應用的下載連結是100%安全的。APKFab.com上列出的所有應用下載連結均來自Google Play Store或由用戶提交。對於來自Google Play商店的應用，APKFab.com不會對其進行任何形式的修改。對於用戶提交的應用，APKFab.com會在網站上發佈之前驗證其APK簽名的安全性。