Juggluco
8.1 96
v10.10.0-phone-li3-si-x-g by Jaap Korthals Altes
關於 Juggluco
Juggluco（包名：tk.glucodata）開發者是Jaap Korthals Altes，Juggluco的最新版本10.10.0-phone-li3-si-x-g更新時間為2026年08月11日。Juggluco的分類是醫療。您可以查看Juggluco的開發者下的所有應用。目前這個應用免費。該應用可以從APKFab或Google Play下載到Android 10.0+。APKFab.com的所有APK/XAPK文檔都是原始文檔並且100%安全下載的資源。
The motivation to write Juggluco was the need to use the sensor glucose values for something more than knowing my current glucose level or getting a global view the success of my glucose control.
I wanted to use the glucose curve to easily refer back to previous experiences and see exactly how it went in relation to insulin doses, carbohydrate intake and activities. A little isolated slowly generated curve in portrait mode doesn’t allow for that.
Juggluco is an app that receives glucose values via Bluetooth from Freestyle Libre 2, 2+, 3 and 3+, Sibionics GS1Sb, Dexcom G7/ONE+, Accu-Chek SmartGuide, CareSens Air and Linx/Aidex X sensors. In addition, Juggluco can scan NovoPen® 6 and NovoPen Echo® Plus and receive test results via Bluetooth from Contour Next glucose meters.
Juggluco can send glucose values to all kinds of smartwatches, see left menu→Watch→Help: https://www.juggluco.nl/Jugglucohelp/watchinfo.html
The phone version of Juggluco can talk out incoming glucose values, display it in a widget on the home screen and in floating glucose above other apps. Juggluco can display the usual glucose statistics. Other apps can receive data from Juggluco via glucose broadcasts and the web server in Juggluco. Juggluco can send data to Health Connect, Libreview and Nightscout. Data can also be exported to a file or send to another exemplar of Juggluco on another phone, tablet, emulator or watch. It has the option to set low and high glucose alarms and medication reminders.
StartTo use a Libre 2 sensor, scan it with Juggluco. To take over a Libre 3 sensor from Abbott's Libre 3-only app, you need to enter in left menu→Settings→Exchange data→Libreview the same account as when activating the sensor and press Get account ID, to receive a number from Libreview. When you now scan the sensor this number will be sent to the sensor. No Libreview account is needed, when the Libre 3 sensor is activated with Juggluco: enter an arbitrary number before scanning the sensor. The first time it takes 2 to 10 minutes before Juggluco receives a glucose value via Bluetooth from the sensor. To prevent interference, force stop apps and turn off devices previously used with the sensor. To keep Juggluco running in the background, allow background activity and turn off battery optimizations for Juggluco. Don’t hide Juggluco’s notification.
After scanning a Libre 2 sensor with Juggluco, Abbott’s Libre 2 app can only scan the sensor (when two apps are on the same phone they can both receive glucose values from European Libre 2 sensors, but this can give connection problems.) Libre 3 sensors can still be used with Abbott’s Libre 3 only app after using it with Juggluco: stop Juggluco and scan the sensor with Abbott’s Libre 3 app, agreeing that you stop the current sensor and start a new one. When going back to Juggluco you have to scan again.
Scan with left menu→Photo the data matrix on the applicator for of Dexcom G7/ONE+, the package of Sibionics GS1Sb and Linx/Aidex X and the inner package of CareSens Air, and the blue cap of Accu-Check SmartGuide sensors. For the last enter the pin when asked. Warning: CareSens Air sensors can switch device only once. See: https://www.juggluco.nl/Juggluco/sensors
Wear OSThe phone version of Juggluco scans the sensor and sends this data to the WearOS version of Juggluco. Bluetooth on both phone and watch needs to be turned on. For fast transmission, also WIFI. After initialization, you can switch on and off directly connecting the sensor with the watch, with left menu→Watch→Wear OS config→Direct sensor-watch connection. https://github.com/j-kaltes/Juggluco/wiki#wearos-watches collects information about how well different watches work with Juggluco.
Wear OS version contains complications to display the glucose level on a watch face.
https://www.juggluco.nl/Jugglucohelp/introhelp.html
I wanted to use the glucose curve to easily refer back to previous experiences and see exactly how it went in relation to insulin doses, carbohydrate intake and activities. A little isolated slowly generated curve in portrait mode doesn’t allow for that.
Juggluco is an app that receives glucose values via Bluetooth from Freestyle Libre 2, 2+, 3 and 3+, Sibionics GS1Sb, Dexcom G7/ONE+, Accu-Chek SmartGuide, CareSens Air and Linx/Aidex X sensors. In addition, Juggluco can scan NovoPen® 6 and NovoPen Echo® Plus and receive test results via Bluetooth from Contour Next glucose meters.
Juggluco can send glucose values to all kinds of smartwatches, see left menu→Watch→Help: https://www.juggluco.nl/Jugglucohelp/watchinfo.html
The phone version of Juggluco can talk out incoming glucose values, display it in a widget on the home screen and in floating glucose above other apps. Juggluco can display the usual glucose statistics. Other apps can receive data from Juggluco via glucose broadcasts and the web server in Juggluco. Juggluco can send data to Health Connect, Libreview and Nightscout. Data can also be exported to a file or send to another exemplar of Juggluco on another phone, tablet, emulator or watch. It has the option to set low and high glucose alarms and medication reminders.
StartTo use a Libre 2 sensor, scan it with Juggluco. To take over a Libre 3 sensor from Abbott's Libre 3-only app, you need to enter in left menu→Settings→Exchange data→Libreview the same account as when activating the sensor and press Get account ID, to receive a number from Libreview. When you now scan the sensor this number will be sent to the sensor. No Libreview account is needed, when the Libre 3 sensor is activated with Juggluco: enter an arbitrary number before scanning the sensor. The first time it takes 2 to 10 minutes before Juggluco receives a glucose value via Bluetooth from the sensor. To prevent interference, force stop apps and turn off devices previously used with the sensor. To keep Juggluco running in the background, allow background activity and turn off battery optimizations for Juggluco. Don’t hide Juggluco’s notification.
After scanning a Libre 2 sensor with Juggluco, Abbott’s Libre 2 app can only scan the sensor (when two apps are on the same phone they can both receive glucose values from European Libre 2 sensors, but this can give connection problems.) Libre 3 sensors can still be used with Abbott’s Libre 3 only app after using it with Juggluco: stop Juggluco and scan the sensor with Abbott’s Libre 3 app, agreeing that you stop the current sensor and start a new one. When going back to Juggluco you have to scan again.
Scan with left menu→Photo the data matrix on the applicator for of Dexcom G7/ONE+, the package of Sibionics GS1Sb and Linx/Aidex X and the inner package of CareSens Air, and the blue cap of Accu-Check SmartGuide sensors. For the last enter the pin when asked. Warning: CareSens Air sensors can switch device only once. See: https://www.juggluco.nl/Juggluco/sensors
Wear OSThe phone version of Juggluco scans the sensor and sends this data to the WearOS version of Juggluco. Bluetooth on both phone and watch needs to be turned on. For fast transmission, also WIFI. After initialization, you can switch on and off directly connecting the sensor with the watch, with left menu→Watch→Wear OS config→Direct sensor-watch connection. https://github.com/j-kaltes/Juggluco/wiki#wearos-watches collects information about how well different watches work with Juggluco.
Wear OS version contains complications to display the glucose level on a watch face.
https://www.juggluco.nl/Jugglucohelp/introhelp.html
Juggluco 10.10.0-phone-li3-si-x-g 更新
- OpenAI update of Ukrainian translation- Bug fixes
- Option to upload files to Juggluco's web server to make it easier to make use of data in Juggluco
- Libre 3 implementation changes
查看更多
Juggluco 資訊
歷史版本
更多
Variant
Arch
Version
DPI
901
2026年08月12日
Juggluco
10.10.0-phone-li3-si-x-g
(901)
Requires Android: Android 10.0+
Architecture: arm64-v8a
Screen DPI: nodpi
SHA1: 57e311fe1dc01f265a218a62e03c5ed95ddfbaa7
Base APK: tk.glucodata.apk
Split APKs: config.ar, config.arm64_v8a, config.de, config.en, config.es, config.fr, config.hi, config.in, config.it, config.ja, config.ko, config.my, config.pt, config.ru, config.th, config.tr, config.vi, config.xxxhdpi, config.zh
Size: 13.38 MB
What's New:
- OpenAI update of Ukrainian translation
- Bug fixes
- Option to upload files to Juggluco's web server to make it easier to make use of data in Juggluco
- Libre 3 implementation changes
- Bug fixes
- Option to upload files to Juggluco's web server to make it easier to make use of data in Juggluco
- Libre 3 implementation changes
arm64-v8a
Android 10.0+
nodpi
901
2026年08月12日
Juggluco
10.10.0-phone-li3-si-x-g
(901)
Requires Android: Android 10.0+
Architecture: armeabi-v7a
Screen DPI: nodpi
SHA1: 0b5e010cca11e18a6c4b9447c67b601ebdaa7d89
Base APK: tk.glucodata.apk
Split APKs: config.ar, config.armeabi_v7a, config.de, config.en, config.es, config.fr, config.hi, config.in, config.it, config.ja, config.ko, config.mdpi, config.my, config.pt, config.ru, config.th, config.tr, config.vi, config.zh
Size: 13.58 MB
What's New:
- OpenAI update of Ukrainian translation
- Bug fixes
- Option to upload files to Juggluco's web server to make it easier to make use of data in Juggluco
- Libre 3 implementation changes
- Bug fixes
- Option to upload files to Juggluco's web server to make it easier to make use of data in Juggluco
- Libre 3 implementation changes
armeabi-v7a
Android 10.0+
nodpi
Variant
Arch
Version
DPI
898
2026年07月23日
Juggluco
10.9.8-phone-li3-si-x-g
(898)
Requires Android: Android 10.0+
Architecture: arm64-v8a
Screen DPI: nodpi
SHA1: 17392fd306734eeefe607216277b70723216f54a
Base APK: tk.glucodata.apk
Split APKs: config.ar, config.arm64_v8a, config.de, config.en, config.es, config.fr, config.hi, config.in, config.it, config.ja, config.ko, config.my, config.pt, config.ru, config.th, config.tr, config.vi, config.xxxhdpi, config.zh
Size: 15.95 MB
What's New:
Bug fix
arm64-v8a
Android 10.0+
nodpi
898
2026年07月23日
Juggluco
10.9.8-phone-li3-si-x-g
(898)
Requires Android: Android 10.0+
Architecture: armeabi-v7a
Screen DPI: nodpi
SHA1: 1f16e4af4fb31a2e9e7936de9330bcbc63862c6c
Base APK: tk.glucodata.apk
Split APKs: config.ar, config.armeabi_v7a, config.de, config.en, config.es, config.fr, config.hi, config.in, config.it, config.ja, config.ko, config.mdpi, config.my, config.pt, config.ru, config.th, config.tr, config.vi, config.zh
Size: 16.38 MB
What's New:
Bug fix
armeabi-v7a
Android 10.0+
nodpi
Variant
Arch
Version
DPI
894
2026年07月21日
Juggluco
10.9.7-phone-li3-si-x-g
(894)
Requires Android: Android 10.0+
Architecture: arm64-v8a
Screen DPI: nodpi
SHA1: ca57e2d19a71443f3c67a179ae8cc396dc41073f
Base APK: tk.glucodata.apk
Split APKs: config.ar, config.arm64_v8a, config.de, config.en, config.es, config.fr, config.hi, config.in, config.it, config.ja, config.ko, config.my, config.pt, config.ru, config.th, config.tr, config.vi, config.xxxhdpi, config.zh
Size: 15.95 MB
What's New:
The Accu-Chek Mobile (and hopefully other) glucose meters now work with Juggluco.
arm64-v8a
Android 10.0+
nodpi
894
2026年07月21日
Juggluco
10.9.7-phone-li3-si-x-g
(894)
Requires Android: Android 10.0+
Architecture: armeabi-v7a
Screen DPI: nodpi
SHA1: 0356e1b2b8fd5507ddb2ecbd24de90c7c09b91f4
Base APK: tk.glucodata.apk
Split APKs: config.ar, config.armeabi_v7a, config.de, config.en, config.es, config.fr, config.hi, config.in, config.it, config.ja, config.ko, config.mdpi, config.my, config.pt, config.ru, config.th, config.tr, config.vi, config.zh
Size: 16.37 MB
What's New:
The Accu-Chek Mobile (and hopefully other) glucose meters now work with Juggluco.
armeabi-v7a
Android 10.0+
nodpi
Variant
Arch
Version
DPI
893
2026年07月02日
Juggluco
10.9.5-phone-li3-si-x-g
(893)
Requires Android: Android 10.0+
Architecture: arm64-v8a
Screen DPI: nodpi
SHA1: 0891b96c6dcc839e38b0295ecb0427680b06acfb
Base APK: tk.glucodata.apk
Split APKs: config.ar, config.arm64_v8a, config.de, config.en, config.es, config.fr, config.hi, config.in, config.it, config.ja, config.ko, config.my, config.pt, config.ru, config.th, config.tr, config.vi, config.xxxhdpi, config.zh
Size: 15.94 MB
What's New:
Bug fix
arm64-v8a
Android 10.0+
nodpi
893
2026年07月02日
Juggluco
10.9.5-phone-li3-si-x-g
(893)
Requires Android: Android 10.0+
Architecture: armeabi-v7a
Screen DPI: nodpi
SHA1: b57e1493a2f5eafab0e75caebc7e372aa2a6067e
Base APK: tk.glucodata.apk
Split APKs: config.ar, config.armeabi_v7a, config.de, config.en, config.es, config.fr, config.hi, config.in, config.it, config.ja, config.ko, config.mdpi, config.my, config.pt, config.ru, config.th, config.tr, config.vi, config.zh
Size: 16.37 MB
What's New:
Bug fix
armeabi-v7a
Android 10.0+
nodpi
更多資訊
包名:
更新日期:
2026-08-11
最新版本:
10.10.0-phone-li3-si-x-g
請求更新:
Available on:
系統要求:
Android 10.0+
舉報:
安全下載
APKFab.com和該應用的下載連結是100%安全的。APKFab.com上列出的所有應用下載連結均來自Google Play Store或由用戶提交。對於來自Google Play商店的應用，APKFab.com不會對其進行任何形式的修改。對於用戶提交的應用，APKFab.com會在網站上發佈之前驗證其APK簽名的安全性。