DiGi+ SPL Audio Analyzer
8.3 23
v3.0.3 by Gaia Consulting
關於 DiGiPlus Analyzer
DiGiPlus Analyzer（包名：b4a.digiplus）開發者是Gaia Consulting，DiGiPlus Analyzer的最新版本3.0.3更新時間為2019年10月15日。DiGi+ SPL Audio Analyzer的分類是音樂與音效。您可以查看DiGi+ SPL Audio Analyzer的開發者下的所有應用並找到DiGi+ SPL Audio Analyzer在安卓上的49個相似應用。目前這個應用免費。該應用可以從APKFab或Google Play下載到Android 2.3.2+。APKFab.com的所有APK/XAPK文檔都是原始文檔並且100%安全下載的資源。
This application brings the functionalities of a Sound Level Meter (SLM) and a basic Real Time Spectrum Analyzer (RTA) to your phone.
Analyze the ambient (background) noise and the traffic noise (TNI)!
>>SLM Main features:
• 3 measuring modes (Dynamic, Average, Cumulative)
+ 1 weighting filter curves: dBA according to DIN-IEC 651
• simple calibration settings
• sound level versus time chart
• current dB value, avg (Leq), min and max display
• audio threshold trigger
+ sound level distribution chart
+ accumulated sound level chart
+ current value, L90, L50 and L10 values display
+ TNI (Traffic Noise index) display
+ exporting of measures, chart data (CSV) and screenshot (PNG)
• tested with samsung galaxy S S2 S3 S4
• sharing of text values and screen bmp
>>RTA main features:
+ sound level versus linear frequency chart
+ 1/3 octave chart
+ Dynaminc and AVG smoothing mode
+ spectrum zoom and swipe
+ fixed FFT size ( 2048, about 20 Hz accuracy )
+ 4 values versus selected frequency component displayed (current, mean, max, min)
+ 20hz/22kHz band, 44100 Hz sampling rate
>>Data collection
The application relies on the mobile microphone signal. To achieve the best results consider the following:
1) Easy Calibration (only the first time): Some mobiles are automatically calibrated in the first installation phase. For details see the calibration section of the user manual.
2) keep your fingers away from the mobile microphone
3) silence your phone to avoid any ring tones, vibrations and other sounds
4) orient the phone microphone toward the noise source keeping the correct distance
5) click on the function buttons
>>Troubleshooting
1) Wrong SPL calibration: See the Calibration section and type the right calibration values
2) No signals detected below 20dB or over 100dB: most smart phone microphones do not work under 20 dB or over 100 dB
3) Signal attenuation near band limits: the mobile mic may attenuate frequencies <100 Hz and >15000 Hz
Read the embedded User Guide: for any info or troubleshooting you can contact us at support@gaiacons.com.
Analyze the ambient (background) noise and the traffic noise (TNI)!
>>SLM Main features:
• 3 measuring modes (Dynamic, Average, Cumulative)
+ 1 weighting filter curves: dBA according to DIN-IEC 651
• simple calibration settings
• sound level versus time chart
• current dB value, avg (Leq), min and max display
• audio threshold trigger
+ sound level distribution chart
+ accumulated sound level chart
+ current value, L90, L50 and L10 values display
+ TNI (Traffic Noise index) display
+ exporting of measures, chart data (CSV) and screenshot (PNG)
• tested with samsung galaxy S S2 S3 S4
• sharing of text values and screen bmp
>>RTA main features:
+ sound level versus linear frequency chart
+ 1/3 octave chart
+ Dynaminc and AVG smoothing mode
+ spectrum zoom and swipe
+ fixed FFT size ( 2048, about 20 Hz accuracy )
+ 4 values versus selected frequency component displayed (current, mean, max, min)
+ 20hz/22kHz band, 44100 Hz sampling rate
>>Data collection
The application relies on the mobile microphone signal. To achieve the best results consider the following:
1) Easy Calibration (only the first time): Some mobiles are automatically calibrated in the first installation phase. For details see the calibration section of the user manual.
2) keep your fingers away from the mobile microphone
3) silence your phone to avoid any ring tones, vibrations and other sounds
4) orient the phone microphone toward the noise source keeping the correct distance
5) click on the function buttons
>>Troubleshooting
1) Wrong SPL calibration: See the Calibration section and type the right calibration values
2) No signals detected below 20dB or over 100dB: most smart phone microphones do not work under 20 dB or over 100 dB
3) Signal attenuation near band limits: the mobile mic may attenuate frequencies <100 Hz and >15000 Hz
Read the embedded User Guide: for any info or troubleshooting you can contact us at support@gaiacons.com.
DiGiPlus Analyzer 3.0.3 更新
Minor issues removal
查看更多
DiGiPlus Analyzer 資訊
歷史版本
更多
Requires Android: Android 2.3.2+
Screen DPI: 160-480dpi
SHA1: 394a345fb25ab23c686cdef10b2c65219b987ac3
Size: 2.87 MB
What's New:
Minor issues removal
Requires Android: Android 2.3.2+
Screen DPI: 160-480dpi
SHA1: 6b4aaf7ec7707bcc6a0dc64af4aa245693029b6e
Size: 2.87 MB
What's New:
Minor issues removal
Requires Android: Android 2.3.2+
Screen DPI: 160-480dpi
SHA1: 8eaf96c3922105352af7cb41b9e6638fae73ed38
Size: 2.87 MB
What's New:
New AdMob interstitial placing requirement
Minor issues
Minor issues
Requires Android: Android 2.3.2+
Screen DPI: 120-480dpi
SHA1: a12fe00836eaaf3b1f5d9616e4e1e29bd34d22d4
Size: 2.5 MB
What's New:
- better SLM calibration
更多資訊
包名:
更新日期:
2019-10-15
最新版本:
3.0.3
請求更新:
系統要求:
Android 2.3.2+
舉報:
安全下載
APKFab.com和該應用的下載連結是100%安全的。APKFab.com上列出的所有應用下載連結均來自Google Play Store或由用戶提交。對於來自Google Play商店的應用，APKFab.com不會對其進行任何形式的修改。對於用戶提交的應用，APKFab.com會在網站上發佈之前驗證其APK簽名的安全性。