Beyond SMS ★HTC★
8.1 39
v1.2.3 by vndnguyen
關於 Beyond SMS
Beyond SMS（包名：org.vndnguyen.beyondsms）開發者是vndnguyen，Beyond SMS的最新版本1.2.3更新時間為2018年01月02日。Beyond SMS ★HTC★的分類是通訊。您可以查看Beyond SMS ★HTC★的開發者下的所有應用並找到Beyond SMS ★HTC★在安卓上的97個相似應用。目前這個應用免費。該應用可以從APKFab或Google Play下載到Android 1.6+。APKFab.com的所有APK/XAPK文檔都是原始文檔並且100%安全下載的資源。
Beyond SMS - The FIRST and the ONLY app on the Google Play Store that enables to send the Replaceable SMS and other special types of SMS (e.g Ping, Flash messages...)
★ Please install this app only if you have HTC or Pantech devices ★
*** ACKNOWLEDGMENT ***: This app only works on a mobile device that supports the 'sendRawPdu' API function in the firmware. So this app may not work on your device. After installing, you can check if this app works on your device by going to the menu Ability Check.
Currently ONLY support GSM (GPRS, EDGE), UMTS (HSDPA, HSUPA, HSPA, HSPA+) and LTE networks.
Does NOT support CDMA (IS-95, 1xRTT, EV-DO, eHRPD) networks.
Known Working devices: T-Mobile G1, Pantech Sky A820L, HTC Desire S (and may be all HTC devices with stock firmware)
NON-Working devices: Sony Xperia U, Samsung Galaxy S3 Mini, Samsung Galaxy Note II (and may be all other Samsung devices ?)
Key features:
- Support long messages.
- Support alternate Reply Address.
- Support selection for the message storage at the target device.
- Support Replaceable message.
- Support Flash message.
- Support 3 types of Ping message.
- Support Message Waiting Indication (Voicemail, Fax, Email and Other indication).
- Global notification for the delivery reports, even if this app is not running.
Description:
1. Alternate Reply Address:
With this feature, the recipient will reply to the message by using the Alternate Reply Address instead of the sender's address. On some target devices (e.g iPhone before iOS 6 or Pantech Sky, Pantech Vega...), the message will be displayed with this number. On almost other target devices this feature will be ignored, so the recipient won't see any difference.
2. Message Storage:
- Default: the target device will decide where to store the message.
- Phone memory preferred: the target device shall send an acknowledgement to the sender when the message has successfully received and can be stored. The target device shall normally store the message in the phone memory by default, if that is possible, but otherwise the message may be stored elsewhere, e.g. in the SIM memory.
- SIM memory preferred: the target device shall ensure that the message can be stored in the SIM memory before sending an acknowledgement to the sender.
3. Replaceable Message:
With this feature, the old message (that has been sent with this tool) will be overwritten by the new one. The sender can set the replacing cycle for each recipient.
4. Flash Message:
The target device shall display the message immediately and send an acknowledgement to the sender. The message shall not be automatically stored in the target device, but user has an option to save it. On some phones (e.g iPhone) the message will be displayed without the sender's address and without the possibility to save the message.
5. Ping Message:
With ping message, the sender can check whether the recipient is available or not, without disturb them with any call or SMS. The target device shall not indicate any visual alert to the recipient.
6. Message Waiting Indication (MWI):
Special Message Indication (Voicemail, Fax, Email or Other indication) will be sent to the target device. With this message the sender can let the target device think that there is a voicemail (or Fax, or Email). An icon gets displayed at the target device. To clear the icon at the target device, the sender should Deactivate it. Most target devices support display Voicemail icon. Only some device (e.g Nokia) will display Fax, Email and Other indication icons.
Should you have any comment or suggestion, please visit: http://forum.xda-developers.com/showthread.php?t=2144863
Hỗ trợ tiếng Việt: http://www.tinhte.vn/threads/1882708/
★ Please install this app only if you have HTC or Pantech devices ★
*** ACKNOWLEDGMENT ***: This app only works on a mobile device that supports the 'sendRawPdu' API function in the firmware. So this app may not work on your device. After installing, you can check if this app works on your device by going to the menu Ability Check.
Currently ONLY support GSM (GPRS, EDGE), UMTS (HSDPA, HSUPA, HSPA, HSPA+) and LTE networks.
Does NOT support CDMA (IS-95, 1xRTT, EV-DO, eHRPD) networks.
Known Working devices: T-Mobile G1, Pantech Sky A820L, HTC Desire S (and may be all HTC devices with stock firmware)
NON-Working devices: Sony Xperia U, Samsung Galaxy S3 Mini, Samsung Galaxy Note II (and may be all other Samsung devices ?)
Key features:
- Support long messages.
- Support alternate Reply Address.
- Support selection for the message storage at the target device.
- Support Replaceable message.
- Support Flash message.
- Support 3 types of Ping message.
- Support Message Waiting Indication (Voicemail, Fax, Email and Other indication).
- Global notification for the delivery reports, even if this app is not running.
Description:
1. Alternate Reply Address:
With this feature, the recipient will reply to the message by using the Alternate Reply Address instead of the sender's address. On some target devices (e.g iPhone before iOS 6 or Pantech Sky, Pantech Vega...), the message will be displayed with this number. On almost other target devices this feature will be ignored, so the recipient won't see any difference.
2. Message Storage:
- Default: the target device will decide where to store the message.
- Phone memory preferred: the target device shall send an acknowledgement to the sender when the message has successfully received and can be stored. The target device shall normally store the message in the phone memory by default, if that is possible, but otherwise the message may be stored elsewhere, e.g. in the SIM memory.
- SIM memory preferred: the target device shall ensure that the message can be stored in the SIM memory before sending an acknowledgement to the sender.
3. Replaceable Message:
With this feature, the old message (that has been sent with this tool) will be overwritten by the new one. The sender can set the replacing cycle for each recipient.
4. Flash Message:
The target device shall display the message immediately and send an acknowledgement to the sender. The message shall not be automatically stored in the target device, but user has an option to save it. On some phones (e.g iPhone) the message will be displayed without the sender's address and without the possibility to save the message.
5. Ping Message:
With ping message, the sender can check whether the recipient is available or not, without disturb them with any call or SMS. The target device shall not indicate any visual alert to the recipient.
6. Message Waiting Indication (MWI):
Special Message Indication (Voicemail, Fax, Email or Other indication) will be sent to the target device. With this message the sender can let the target device think that there is a voicemail (or Fax, or Email). An icon gets displayed at the target device. To clear the icon at the target device, the sender should Deactivate it. Most target devices support display Voicemail icon. Only some device (e.g Nokia) will display Fax, Email and Other indication icons.
Should you have any comment or suggestion, please visit: http://forum.xda-developers.com/showthread.php?t=2144863
Hỗ trợ tiếng Việt: http://www.tinhte.vn/threads/1882708/
Beyond SMS 1.2.3 更新
v1.2.3: Bug fixes and stability improvements.v1.1.8: Play notification sound when Delivery Report is received
v1.1.7: Add "Message Validity Period" option
v1.1.6: Add "Press Back once to exit" option
v1.1.5: Add "Auto-open" feature
v1.1.4: Add "Replace Last Message" menu to the Replaceable Message
v1.1.0: Add support for some HTC and Pantech devices
v1.0.9: Remove support for some devices, for further investigation
v1.0.5: Auto check for Ability at startup
查看更多
Beyond SMS 資訊
歷史版本
更多
Requires Android: Android 1.6+
Screen DPI: 160-480dpi
SHA1: e4cb6b775326eb7742aa60cb0f6370d5d98f7dc6
Size: 1.79 MB
What's New:
v1.2.3: Bug fixes and stability improvements.
v1.1.8: Play notification sound when Delivery Report is received
v1.1.7: Add "Message Validity Period" option
v1.1.6: Add "Press Back once to exit" option
v1.1.5: Add "Auto-open" feature
v1.1.4: Add "Replace Last Message" menu to the Replaceable Message
v1.1.0: Add support for some HTC and Pantech devices
v1.0.9: Remove support for some devices, for further investigation
v1.0.5: Auto check for Ability at startup
v1.1.8: Play notification sound when Delivery Report is received
v1.1.7: Add "Message Validity Period" option
v1.1.6: Add "Press Back once to exit" option
v1.1.5: Add "Auto-open" feature
v1.1.4: Add "Replace Last Message" menu to the Replaceable Message
v1.1.0: Add support for some HTC and Pantech devices
v1.0.9: Remove support for some devices, for further investigation
v1.0.5: Auto check for Ability at startup
Requires Android: Android 1.6+
Screen DPI: 160-480dpi
SHA1: 9a701d759fe497d7eda46580e0feabfee960a7f3
Size: 1.49 MB
What's New:
v1.2.0: Minor bug fixes, some improvements.
v1.1.8: Play notification sound when Delivery Report is received
v1.1.7: Add "Message Validity Period" option
v1.1.6: Add "Press Back once to exit" option
v1.1.5: Add "Auto-open" feature
v1.1.4: Add "Replace Last Message" menu to the Replaceable Message
v1.1.0: Add support for some HTC and Pantech devices
v1.0.9: Remove support for some devices, for further investigation
v1.0.5: Auto check for Ability at startup
更多資訊
更新日期:
2018-01-02
最新版本:
1.2.3
請求更新:
系統要求:
Android 1.6+
舉報:
安全下載
APKFab.com和該應用的下載連結是100%安全的。APKFab.com上列出的所有應用下載連結均來自Google Play Store或由用戶提交。對於來自Google Play商店的應用，APKFab.com不會對其進行任何形式的修改。對於用戶提交的應用，APKFab.com會在網站上發佈之前驗證其APK簽名的安全性。