- ホーム
- アプリ
- ツール
- ServiceChannel
- バージョン
バージョン履歴
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 120-640dpi
SHA1: 767643451873a35063f11de5f7b724afe578ef39
Size: 84.14 MB
What's New:
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 120-640dpi
SHA1: d5b81faa016cb672654b0a62093b9d80207423a0
Size: 84.1 MB
What's New:
- When you created a work order and scanned or added an asset under warranty, the service provider wasn't updated based on the warranty overrides configured in your dashboard issue list. Now, the service provider will be updated as expected.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 120-640dpi
SHA1: 2ac58c9915822a0eae8478632815d3d61353f697
Size: 84.1 MB
What's New:
- After you created an asset, images attached to it didn't want to open in full-screen mode on the Asset Record screen. A little bit of magic, and they're available again.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 120-640dpi
SHA1: cc978d11eae233b38fac5b75f3ead617718a7464
Size: 84.07 MB
What's New:
- Previously, you could see all locations in the app even though you limited user location access to the Access Based on Location Notes tab of a user profile in Service Automation. Now, you will only be able to view the locations that you have been granted access to.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 120-640dpi
SHA1: cdf39239a2c3a75a12f4b5ba9cae0bde47b35949
Size: 83.97 MB
What's New:
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 120-640dpi
SHA1: f264af16a3d0851137472645bc3672ab2759fe18
Size: 83.97 MB
What's New:
- Fresh from the oven: when you take a photo from the camera during the asset creation, WO creation, adding a WO note, or adding an attachment to a site audit, you can capture two or more photos and save them simultaneously.
FIXED
- Upon filtering WOs by statuses, if you selected multiple statuses along with Invoiced, you saw only WOs in the Invoiced status.
- You couldn't change a proposal status to On Hold. You saw a system error message. This happened if a proposal was linked to a WO.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 120-640dpi
SHA1: e9b78b23bbea1b7aaa8f530c1f4c7c7f4703ddcb
Size: 83.69 MB
What's New:
- When you tried to approve or reject a proposal, you saw an error message asking you to try again later. The error does not pop up anymore.
- You couldn't create a work order when you scanned or manually entered an asset tag. The Problem Code field was grayed out on the Create WO screen. We've fixed it.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 120-640dpi
SHA1: 9d7b04980ce8df73f36d74cb56aa9c41cde0bff2
Size: 71.47 MB
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 120-640dpi
SHA1: 34efe79afe86a0eb7f161b702ab12fb96447f51e
Size: 70.36 MB
What's New:
- You could not change the status of a work order to In Progress. The following error message appeared: Invalid Work Order Status. Now you can update the work order status to In Progress without error messages.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 120-640dpi
SHA1: 7ad2f0bf3d3aa5dfc5939043833327424fd1f644
Size: 70.36 MB
What's New:
-Now, you can add, view, and edit asset meter readings using the SC Mobile app. The entered information will be visible under the Meter Readings section on the Asset Record screen.
- From now on, you can edit completed site audits on the Site Planning screen!
FIXED
- When you double-clicked on the Confirm/Create WO button on the Create WO screen, several duplicate WOs were created instead of one.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 7319e3b9135a82ec0fc61b00e42efb6b5be3c70b
Size: 69.21 MB
What's New:
- When you tried to access the Reviews module from the home page, the app crash occurred. We have improved the app's performance to address the problem.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 8fa482dab016b84884fd02364e8cac9c8130acc2
Size: 69.23 MB
What's New:
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 687f522f23baba221297dbfb0ada582ec9e5f668
Size: 69.25 MB
What's New:
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: bdcec880c10f611cdd3b731827b37b30a1b4b2be
Size: 69.23 MB
What's New:
- The location address was only displayed partially on the work order details and work order list view screens. Now you can see the location address on a work order in full.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: e19bc2d7965c6c2281f652d24345168d113755cd
Size: 69.16 MB
What's New:
- When a subcontractor attempted to check out on a work order, the WorkOrder not found warning message appeared.
- Changing the password by entering less than 6 symbols, you saw the error message about failing to change the password. To be more specific, you will see the following warning message: Password length should be at least 6 characters.
- You couldn't open a work order from the Asset Record screen. The screen was stuck on loading.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 79a23c451431e2fa71f673d455ce4d325afee280
Size: 69.12 MB
What's New:
- During a work order creation, when you didn't select an asset on the Check for Asset screen, the screen was stuck on loading after you select Next. Now you are able to proceed with a work order without selecting an asset.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 8211819865efb7c1319ad1e07d871976814213c6
Size: 69.12 MB
What's New:
- Due to an internal issue, when you logged into the SC Mobile app through the SSO ID and tried to create a work order, the following error message appeared: Something went wrong. You no longer get an error message in this case.
- For some of you, opening asset details in the Manage Assets module ended up in the Something went wrong error. The error does not pop-up anymore.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 5ed90ed3d235b1cd84c1204c4611b59bc6e47d83
Size: 69.11 MB
What's New:
- During work orders or proposals filtering, all of the providers’ names are now sorted in numeric/alphabetical order.
FIXED
- Those of you who use the app in Simplified Chinese will find an improved translation of certain information.
- When you selected View Work Order in the email, a work order didn't open in the app. Now you can open work orders from the email.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: f5786ea9103bb8d173a4495820c4c8fc90fe0a2e
Size: 69.11 MB
What's New:
- The Asset Type field is renamed Equipment on the Create WO screen to make it consistent with the issue list.
FIXED
- At times, when you entered a work order in the app, three work orders were created instead of one. We’ve got rid of duplicates.
- When you created the first asset on a location, manually searching for the asset type on the Asset Type screen, the asset types list stayed empty. The asset type list is now completely visible for all locations.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 385caee17ec7b206ba2a583940d050710a5c0c43
Size: 69.07 MB
What's New:
- Upon creating a work order, when you answered interactive troubleshooting questions and selected the Solved button, a system error message appeared. We've conquered this tricky bug.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 6e386e8b3532e4d676f0ed42d385325dfb507b36
Size: 69.06 MB
What's New:
- During invoices filtering, all of the providers’ names are now sorted in numeric/alphabetical order.
- Upon creating a new work order, you will see that asset categories on the Select Asset screen are now presented alphabetically.
FIXED
- After you submitted a service request, you might have noticed that the Description field on a work order contained HTML code.
- Occasionally, when you tried to create a work order by first adding an asset, the Problem Code drop-down became unavailable.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 37ab3e176f8391455f652ca75bb92544645635ca
Size: 69.11 MB
What's New:
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: ae4411c0cb3fdcf8ae20d5308d6476d9c0d9fe67
Size: 69.03 MB
What's New:
- We've added a bunch of dashboard settings in the SC Mobile app. All these settings can be found, enabled, and managed on the Request Confirm and Request tabs under the dashboard settings in Service Automation.
FIXED
- Due to an internal issue, a work order created in the app was assigned to the wrong provider. Overrides configured in your dashboard issue list were not triggered based on the response to the troubleshooting questions.
https://servicechannel.atlassian.net/wiki/x/GYEhp
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 2766bfd4597420f1ef2d04640a2f1359cf8e2d20
Size: 69.05 MB
What's New:
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 08376c376d85e4523c42239cba7f67dccb3f55f6
Size: 68.85 MB
What's New:
- Due to an internal issue, a work order created in the app was assigned to the wrong provider. Overrides configured in your dashboard issue list were not triggered based on the response to the troubleshooting questions.
- You couldn't turn on push notifications for devices using Android OS version 13. We've tackled this issue. Note that you should allow to send notifications and re-log into the app to proceed.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 1634213f94b2e0921b3cf46a43157a043f9c80e6
Size: 68.84 MB
What's New:
- Upon creating a work order and answering interactive troubleshooting questions, you might have noticed that when you entered a 10-digit phone number in the text field, a system error message appeared. We've made some improvements, and the error no longer pops up.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: da15f37924f9668408fc221dc8ae4e02bb264a18
Size: 68.82 MB
What's New:
- When you tried to create a new audit, a system error message appeared. Now you can create new site audits without error messages.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: fcd314b096c102465d56e1a29389190721a7b5e4
Size: 68.54 MB
What's New:
- Occasionally, the call date on the work order details screen was displayed incorrectly. This happened due to a time zone discrepancy. We've spotted the problem and cracked it.
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 444ca29833bda2aaacf8d8e5918d41a17835c4ff
Size: 68.66 MB
What's New:
Requires Android: Android 8.0+
Architecture: arm64-v8a, armeabi-v7a, mips, mips64, x86, x86_64
Screen DPI: 160-640dpi
SHA1: 17cd2fbd4335a7e6010afc4d131211a2d814b0c6
Size: 68.65 MB
What's New: